Tag Archives: screw and

China factory Chinese CHINAMFG Factory Price Intelligent High Quality Super Energy Saving Electric Motor Powered Direct Screw Air Compressor with CE and ISO Certification arb air compressor

Product Description

BEEST—-AIR COMPRESSOR&SOLUTION

Moair Energy Conservation Durable Two Stage Screw Air Compressor with Double Permanent Magnet Motor

1. Company background

ZheJiang CHINAMFG International Trade Co., Ltd. is the senior partner of HangZhou CHINAMFG Compressor Co., Ltd , we are committed to the sales and after-sales service of air compressors in Southeast Asia, and have stores in Indonesia.
We are the professional manufacturer of the air compressor products of various types including the permanent-magnet synchronous variable-frequency series,permanent-magnet synchronous low-pressure series,permanent-magnet sunchronous two-stage compressors series,etc.
More than 10 years of professional screw compressors manufacturing technology,bringing the international first-class permanent magnet synchronous drive and control technologies.

2. Product introduction
 

With a permanent magnet motor, our MDE series 2 stage rotary screw air compressor with single permanent magnet motor drive has a definite advantage over traditional 2 stage rotary CHINAMFG considering its energy savings, high efficiency and low noise.

The main power range is from 132kw to 200kw, the air pressure range is from 6bar to 13bar and the air fow range is from 23.8m3/min to 43m3/min.

3.Core components

Motor 

  • More stable: no mechanical transmission troubles
    There is no gear shaft in the air compressor and the effective permanent magnet motor and the male rotor are directly connected on 1 shaft without gear drive, which can eliminate pitting of gear or hidden troubles of tooth fracture.
    Without shaft coupling, 2 integrated PM motors directly drive 2 airends of the air compressor, avoiding the hidden troubles of shaft coupling failure.
  • More energy-savings: the airend is always in a smooth running state
    The 2 stage 3 phase permanent magnet rotary gear screw air compressor of CHINAMFG is powered by 2 independent PM motors and 2 independent inverters, which is intelligently controlled such as keep the airend running at a best level-pressure point by controlling discharge pressure and interstage pressure under the circumstance of different rotary speed and different pressure. The best running speed of air compressor can be automatically calculated while running and then the compression ratio can be balanced by final match, which can keep the compressor in a best running state, thus obtaining the highest efficiency.
  • More effective: high-efficiency permanent magnet motor and no gear drive loss.
    With a motor of a high protection degree of IP54, it is more energy-saving and it can stay effective at low frequency and low speed.
  • More environment-friendly operation with lower noise
    No noise of motor bearings, gear meshing and coupling transmission.
  • More structure-compact
    The volume of PM motor is small and the structure is compact, which can save much space.

    4.Specifications and parameters

     

    5.Principle of energy-saving
     

    • Change the traditional induction motor with high-efficiency technology of permanent magnet rotary screw motor, thus reducing the consumption in transmission.
    • Powered by 2 independent PM motors and 2 independent inverters, the compressor is intelligently controlled such as keep the airend running at a best level-pressure point by controlling pressure of air flow and interstage pressure under the circumstance of different rotary speed and different pressure. The best running speed of compressor can be automatically calculated while running and then the compression ratio can be balanced by final match, which can keep the compressor in a best running state, thus obtaining the highest efficiency.
    • Because the gear ratio is fixed, point efficiency is emphasized in this case. That is to say, only with fixed rotary speed and rated pressure did it have the best specific power. When running in a state of variable speed and variable frequency, considering the fixed speed of gear, interstage pressure will not reach the best one. Rotational speed declining while energy consumption not declining at the same time, it is not suitable for running in variable speed and variable frequency state.

       

    /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

    After-sales Service: Online Service
    Warranty: One Year
    Lubrication Style: Lubricated
    Cooling System: Air Cooling
    Power Source: AC Power
    Cylinder Position: Vertical

    air compressor

    Can air compressors be used for gas compression and storage?

    Yes, air compressors can be used for gas compression and storage. While air compressors are commonly used to compress and store air, they can also be utilized for compressing and storing other gases, depending on the specific application requirements. Here’s how air compressors can be used for gas compression and storage:

    Gas Compression:

    Air compressors can compress various gases by utilizing the same principles applied to compressing air. The compressor takes in the gas at a certain pressure, and through the compression process, it increases the pressure and reduces the volume of the gas. This compressed gas can then be used for different purposes, such as in industrial processes, gas pipelines, or storage systems.

    Gas Storage:

    Air compressors can also be used for gas storage by compressing the gas into storage vessels or tanks. The compressed gas is stored at high pressure within these vessels until it is needed for use. Gas storage is commonly employed in industries where a continuous and reliable supply of gas is required, such as in natural gas storage facilities or for storing compressed natural gas (CNG) used as a fuel for vehicles.

    Gas Types:

    While air compressors are primarily designed for compressing air, they can be adapted to handle various gases, including but not limited to:

    • Nitrogen
    • Oxygen
    • Hydrogen
    • Carbon dioxide
    • Natural gas
    • Refrigerant gases

    It’s important to note that when using air compressors for gas compression and storage, certain considerations must be taken into account. These include compatibility of the compressor materials with the specific gas being compressed, ensuring proper sealing to prevent gas leaks, and adhering to safety regulations and guidelines for handling and storing compressed gases.

    By leveraging the capabilities of air compressors, it is possible to compress and store gases efficiently, providing a reliable supply for various industrial, commercial, and residential applications.

    air compressor

    How do you maintain proper air quality in compressed air systems?

    Maintaining proper air quality in compressed air systems is essential to ensure the reliability and performance of pneumatic equipment and the safety of downstream processes. Here are some key steps to maintain air quality:

    1. Air Filtration:

    Install appropriate air filters in the compressed air system to remove contaminants such as dust, dirt, oil, and water. Filters are typically placed at various points in the system, including the compressor intake, aftercoolers, and before point-of-use applications. Regularly inspect and replace filters to ensure their effectiveness.

    2. Moisture Control:

    Excessive moisture in compressed air can cause corrosion, equipment malfunction, and compromised product quality. Use moisture separators or dryers to remove moisture from the compressed air. Refrigerated dryers, desiccant dryers, or membrane dryers are commonly employed to achieve the desired level of dryness.

    3. Oil Removal:

    If the compressed air system utilizes oil-lubricated compressors, it is essential to incorporate proper oil removal mechanisms. This can include coalescing filters or adsorption filters to remove oil aerosols and vapors from the air. Oil-free compressors eliminate the need for oil removal.

    4. Regular Maintenance:

    Perform routine maintenance on the compressed air system, including inspections, cleaning, and servicing of equipment. This helps identify and address any potential issues that may affect air quality, such as leaks, clogged filters, or malfunctioning dryers.

    5. Air Receiver Tank Maintenance:

    Regularly drain and clean the air receiver tank to remove accumulated contaminants, including water and debris. Proper maintenance of the tank helps prevent contamination from being introduced into the compressed air system.

    6. Air Quality Testing:

    Periodically test the quality of the compressed air using appropriate instruments and methods. This can include measuring particle concentration, oil content, dew point, and microbial contamination. Air quality testing provides valuable information about the effectiveness of the filtration and drying processes and helps ensure compliance with industry standards.

    7. Education and Training:

    Educate personnel working with compressed air systems about the importance of air quality and the proper procedures for maintaining it. Provide training on the use and maintenance of filtration and drying equipment, as well as awareness of potential contaminants and their impact on downstream processes.

    8. Documentation and Record-Keeping:

    Maintain accurate records of maintenance activities, including filter replacements, drying system performance, and air quality test results. Documentation helps track the system’s performance over time and provides a reference for troubleshooting or compliance purposes.

    By implementing these practices, compressed air systems can maintain proper air quality, minimize equipment damage, and ensure the integrity of processes that rely on compressed air.

    air compressor

    What is the role of air compressor tanks?

    Air compressor tanks, also known as receiver tanks or air receivers, play a crucial role in the operation of air compressor systems. They serve several important functions:

    1. Storage and Pressure Regulation: The primary role of an air compressor tank is to store compressed air. As the compressor pumps air into the tank, it accumulates and pressurizes the air. The tank acts as a reservoir, allowing the compressor to operate intermittently while providing a steady supply of compressed air during periods of high demand. It helps regulate and stabilize the pressure in the system, reducing pressure fluctuations and ensuring a consistent supply of air.

    2. Condensation and Moisture Separation: Compressed air contains moisture, which can condense as the air cools down inside the tank. Air compressor tanks are equipped with moisture separators or drain valves to collect and remove this condensed moisture. The tank provides a space for the moisture to settle, allowing it to be drained out periodically. This helps prevent moisture-related issues such as corrosion, contamination, and damage to downstream equipment.

    3. Heat Dissipation: During compression, air temperature increases. The air compressor tank provides a larger surface area for the compressed air to cool down and dissipate heat. This helps prevent overheating of the compressor and ensures efficient operation.

    4. Pressure Surge Mitigation: Air compressor tanks act as buffers to absorb pressure surges or pulsations that may occur during compressor operation. These surges can be caused by variations in demand, sudden changes in airflow, or the cyclic nature of reciprocating compressors. The tank absorbs these pressure fluctuations, reducing stress on the compressor and other components, and providing a more stable and consistent supply of compressed air.

    5. Energy Efficiency: Air compressor tanks contribute to energy efficiency by reducing the need for the compressor to run continuously. The compressor can fill the tank during periods of low demand and then shut off when the desired pressure is reached. This allows the compressor to operate in shorter cycles, reducing energy consumption and minimizing wear and tear on the compressor motor.

    6. Emergency Air Supply: In the event of a power outage or compressor failure, the stored compressed air in the tank can serve as an emergency air supply. This can provide temporary air for critical operations, allowing time for maintenance or repairs to be carried out without disrupting the overall workflow.

    Overall, air compressor tanks provide storage, pressure regulation, moisture separation, heat dissipation, pressure surge mitigation, energy efficiency, and emergency backup capabilities. They are vital components that enhance the performance, reliability, and longevity of air compressor systems in various industrial, commercial, and personal applications.

    China factory Chinese CHINAMFG Factory Price Intelligent High Quality Super Energy Saving Electric Motor Powered Direct Screw Air Compressor with CE and ISO Certification   arb air compressorChina factory Chinese CHINAMFG Factory Price Intelligent High Quality Super Energy Saving Electric Motor Powered Direct Screw Air Compressor with CE and ISO Certification   arb air compressor
    editor by CX 2024-05-15

    China OEM 75kw Motorized Mobile Portable Screw Air Compressor with Cooling Fan and 2 Air Tanks mini air compressor

    Product Description

    Electric Drive Compressor Mobile Portable Screw Air Compressor with Cooling Fan and 2 Air Tanks, 0.8-1.0 Mpa, for Outdoor Work, 75KW, 55KW, 45KW, 37KW, 30KW, 22KW, 15KW, 11KW, 7.5KW

    Product Structure

    Structure Frontside

    Structure Backside

    Advantages of small mobile screw air compressor

    1. High reliability: the compressor has fewer parts and no wearing parts, so it runs reliably and has a long service life, and the overhaul time can be up to 40,000 to 80,000 hours.

    2. Convenient operation and maintenance: high degree of automation, the operator does not have to go through a long time of professional training, can realize unattended operation.

    3. Good power balance: it can run smoothly at high speed, characterized by strong gas transmission, fast gas supply, volumetric flow rate almost unaffected by exhaust pressure, and efficiency can be maintained at a wide range of speeds.

    4. Strong adaptability: small size, light weight, small footprint, easy to move, very suitable for application in building construction, spraying, pile breaking, sand blasting, urban construction, road construction and other industries.

    5. Complete variety series: The complete series of products, the exhaust volume has been from small to large, which meets the needs of different construction conditions.  There are diverse structures, suitable for different users.

     

    Product Parameters

     

    Model Power Pressure Free air delivery* of unit at working pressure Noise Level Air outlet discharge size Weight Dimensions
    KW Mpa m³/min dB(A) Inch Kg L*W*H(mm)
    SZDY08 7.5 0.8 1.2 68 G1 250 1500*500*1100
    1.0 1.0
    SZDY11 11 0.8 1.6 68 G1 260 1500*500*1100
    1.0 1.3
    SZDY15 15 0.8 2.4 68 G1 320 1600*800*1200
    1.0 2.0
    SZDY22 22 0.8 3.6 70 G1 400 1600*800*1200
    1.0 3.0
    SZDY30 30 0.8 5.0 70 G1 480 1800*900*1200
    1.0 4.5
    SZDY37 37 0.8 6.6 70 G1 600 1800*900*1200
    1.0 6.0
    SZDY45 45 0.8 8.0 71 G2″ 800 2100*900*1430
    1.0 7.0
    SZDY55 55 0.8 10.0 74 G2″ 950 2100*900*1430
    1.0 9.0
    SZDY75 75 0.8 13.0 76 G2″ 1100 2100*900*1430
    1.0 11.8

    Mobile screw air compressor, external power supply as a drive to drive the air compressor work.
     

    Detailed Photos

     

    Fixed Frequency Motor
    Insulation grade F, protective grade IP55, stable flow rate. Constant load, high efficiency and durability.

    German Technology Air End
    The air end adopts a large rotor, a low-speed design, high efficiency, low noise, low vibration, high reliability, with less leakage, and high volume efficiency.

    Smart Touch Controller
    Superior built-in intelligence requires minimal manual operation. A high-precision color electronic screen, clear graphics display, and indication of maintenance information, fault alarms, and safety shutdown alarms.

    Cooling System
    Large heat exchange area design effectively prevents high-temperature machines and reduces oil emulsification and coking caused by high-temperature.

    Reliable Oil and Air Separator
    Vertical tangential cyclone separation structure, complete separation of oil and air, easy replacement of cartridge, and reduced maintenance cost.

    Safe and Zero Leakage Connection
    Sanzhi has abandoned the traditional low-cost hydraulic hose design. Sanzhi uses High-rigid pipes and flexible joint connections, avoiding bursts typically caused by aging, rubber type 0-ring offers a flexible seal preventing leakage.

    Horizontal Air tank
    Two air storage tanks, 8 bar each, equipped with 4 wheels for smoothness.

    Pressure gauge
    Current working pressure can be clearly viewed through the pressure gauge.

     

    Our Advantages

    1. Price advantage

    Direct to provide customers with ex-factory prices, so that customers are more competitive.

    2. Direct deal
    All products are supplied directly from the factory and we will offer more cost-effective products.

    3. OEM & ODM services
    The strong production and management capacity of the factory can provide OEM/ODM service for you.

    4. Customised service
    We accept non-standard orders, export orders, voltage/power/pressure, etc, which can be customized. If you have demands, please contact us.

    5. Accept small order
    You can place a small trial order first to test the quality of our products.

    6. Fast delivery
    High-quality products with timely delivery.

    7. Complete authorisation
    For distributors, we can provide the full authorization certificate to allow you to sell our SANZHI brand products.

     

    More Products

     

     

    Packaging & Shipping

     

    Company Profile

     


    Sanzhi (ZheJiang ) Compressor Co., Ltd is a manufacturer in the production of screw air compressors and screw vacuum pumps, with more than 10 years of experience. The extensive product range includes normal pressure/low-pressure screw air compressors, permanent magnet frequency conversion screw air compressors, two-stage compression screw air compressors, screw air compressors for laser cutting, single-tank mobile screw air compressors, double-tank mobile screw air compressor, electric mobile screw air compressor, diesel mobile screw air compressor, screw vacuum pump, etc.

    In production, we are able to achieve the most efficient production by multi-air compressor assembly lines which are lean and modern. With the effort of over 50 employees, we continue to optimize management systems such as ERP to shorten the lead time and deliver qualified products at a fast speed.

    In management, our factory passed ISO9001 quality management system certification. We always adhere to the implementation of the stringent quality management system, and strictly implement the standard quality control processes. The outgoing of each machine is an experience of material inspection, production inspection and pre-delivery inspection.

    In customer service, on the hand of pre-sales, we offer our customers a professional guide to choosing air equipment for multiple facilities and supply with high customization like its appearance and allocation, and we are even able to create unique products to meet dealer’s demand, that is OEM. Meanwhile, for after-sales, we staffed a professional sales & service team for quick response to customers.

    We Sanzhi (ZheJiang ) Compressor Co., Ltd, devote ourselves to delivering superior and stable products, for building long-term relationships with our customers. Efficient delivery, qualified machine, and worthy price, we are reliable to provide you with a satisfactory compressed air solution.

    Our factory is located in HangZhou City, ZheJiang Province, China. We can pick you up from HangZhou International Airport to our factory, 30 kilometers in about 1 hour. Welcome to our company!

    FAQ
    Q1. Are you a trading company or manufacturer?
    A: We are a professional manufacturer of screw air compressors, with more than 10 years of experience.

    Q2. How do you control quality?
    A: 1. The raw materials are strictly inspected.
      2. Installation procedures are strictly controlled.
      3. Each machine must pass at least 5 hours of continuous testing before leaving the factory.

    Q3. What information must I provide to get the suitable machine?
    1. How much air delivery capacity (Unit: CFM or m³/Min)
    2. How much working pressure (Unit: PSI, Bar or Mpa)
    3. What is the voltage and frequency of my country of residence (V/Hz)
    4. Whether I need other accessories such as an air tank, filters, and/or air dryers.
    Tell us the answer, we will offer a scheme for you!

    Q4. What is the general unit conversion?
    1Bar = 0.1Mpa = 14.5PSI
    1m³/min = 35.32cfm
    1KW = 1.34HP

    Q5. What is the available voltage air compressor?
    A: Sanzhi available voltage include 380v/50hz/3p, 400v/50hz/3p, 415v/50hz/3p, 220v/60hz/3p, 440v/60hz/3p, and can be customized according to your requirements.

    Q6. How long is the delivery time?
    A: For standard voltage,15 working days after the confirmed order. Non-standard, please contact our sales.

    Q7. What’s the payment term?
    A: 30% T/T in advance, 40% T/T before shipment, and 30% T/T against the B/L copy. USD, RMB can be accepted.

    Q8. How about your warranty?
    A: One year for the whole machine and 2 years for screw air compressor, except for consumable spare parts.

    Q9. What about the maintenance?
    A: First maintenance needs to be done after 500 hours, and then every 2000-3000 hours to do the normal maintenance, and consider the actual environment.

    Q10. Can machines be run in high-temperature environment?
    A: Yes, machines would run in high-temperature environment countries. Working temperature from -20° to 45°(-4ºF-113ºF).

    Q11. Do you offer OEM service?
    A: Yes, with a professional design team, both OEM & ODM orders are highly welcome.

    Q12. How long could your air compressor be used?
    A: Generally, more than 10 years.

    Q13. Will you provide some spare parts for the machines?
    A: Yes, of course.

    Q14. How about your after-sales service?
    A: Provide customers with installation and commissioning online instructions, and arrange for our engineers to help you with training and installation.
      /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

    After-sales Service: Online Technology Support
    Warranty: 1 Year, 2 Years
    Lubrication Style: Lubricated
    Samples:
    US$ 4850/Piece
    1 Piece(Min.Order)

    |

    Order Sample

    Sample Color: Picture Color
    Customization:
    Available

    |

    .shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

    Shipping Cost:

    Estimated freight per unit.







    about shipping cost and estimated delivery time.
    Payment Method:







     

    Initial Payment



    Full Payment
    Currency: US$
    Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

    air compressor

    Are there special considerations for air compressor installations in remote areas?

    Yes, there are several special considerations to take into account when installing air compressors in remote areas. These areas often lack access to infrastructure and services readily available in urban or well-developed regions. Here are some key considerations:

    1. Power Source:

    Remote areas may have limited or unreliable access to electricity. It is crucial to assess the availability and reliability of the power source for operating the air compressor. In some cases, alternative power sources such as diesel generators or solar panels may need to be considered to ensure a consistent and uninterrupted power supply.

    2. Environmental Conditions:

    Remote areas can present harsh environmental conditions that can impact the performance and durability of air compressors. Extreme temperatures, high humidity, dust, and corrosive environments may require the selection of air compressors specifically designed to withstand these conditions. Adequate protection, insulation, and ventilation must be considered to prevent damage and ensure optimal operation.

    3. Accessibility and Transport:

    Transporting air compressors to remote areas may pose logistical challenges. The size, weight, and portability of the equipment should be evaluated to ensure it can be transported efficiently to the installation site. Additionally, the availability of suitable transportation infrastructure, such as roads or air transportation, needs to be considered to facilitate the delivery and installation process.

    4. Maintenance and Service:

    In remote areas, access to maintenance and service providers may be limited. It is important to consider the availability of trained technicians and spare parts for the specific air compressor model. Adequate planning for routine maintenance, repairs, and troubleshooting should be in place to minimize downtime and ensure the longevity of the equipment.

    5. Fuel and Lubricants:

    For air compressors that require fuel or lubricants, ensuring a consistent and reliable supply can be challenging in remote areas. It is necessary to assess the availability and accessibility of fuel or lubricant sources and plan for their storage and replenishment. In some cases, alternative or renewable fuel options may need to be considered.

    6. Noise and Environmental Impact:

    Remote areas are often characterized by their natural beauty and tranquility. Minimizing noise levels and environmental impact should be a consideration when installing air compressors. Selecting models with low noise emissions and implementing appropriate noise reduction measures can help mitigate disturbances to the surrounding environment and wildlife.

    7. Communication and Remote Monitoring:

    Given the remote location, establishing reliable communication channels and remote monitoring capabilities can be essential for effective operation and maintenance. Remote monitoring systems can provide real-time data on the performance and status of the air compressor, enabling proactive maintenance and troubleshooting.

    By addressing these special considerations, air compressor installations in remote areas can be optimized for reliable operation, efficiency, and longevity.

    air compressor

    Can air compressors be used for inflating tires and sporting equipment?

    Yes, air compressors can be used for inflating tires and sporting equipment, providing a convenient and efficient method for achieving the desired air pressure. Here’s how air compressors are used for these purposes:

    1. Tire Inflation:

    Air compressors are commonly used for inflating vehicle tires, including car tires, motorcycle tires, bicycle tires, and even larger truck or trailer tires. Air compressors provide a continuous source of pressurized air, allowing for quick and accurate inflation. They are often used in automotive repair shops, gas stations, and by individuals who regularly need to inflate tires.

    2. Sporting Equipment Inflation:

    Air compressors are also useful for inflating various types of sporting equipment. This includes inflatable balls such as soccer balls, basketballs, footballs, and volleyballs. Additionally, air compressors can be used to inflate inflatable water toys, air mattresses, inflatable kayaks, and other recreational items that require air for proper inflation.

    3. Air Tools for Inflation:

    Air compressors can power air tools specifically designed for inflation purposes. These tools, known as inflators or air blow guns, provide controlled airflow for inflating tires and sporting equipment. They often have built-in pressure gauges and nozzles designed to fit different types of valves, making them versatile and suitable for various inflation tasks.

    4. Adjustable Pressure:

    One advantage of using air compressors for inflation is the ability to adjust the pressure. Most air compressors allow users to set the desired pressure level using a pressure regulator or control knob. This feature ensures that tires and sporting equipment are inflated to the recommended pressure, promoting optimal performance and safety.

    5. Efficiency and Speed:

    Air compressors provide a faster and more efficient inflation method compared to manual pumps. The continuous supply of compressed air allows for quick inflation, reducing the time and effort required to inflate tires and sporting equipment manually.

    6. Portable Air Compressors:

    For inflating tires and sporting equipment on the go, portable air compressors are available. These compact and lightweight compressors can be easily carried in vehicles or taken to sports events and outdoor activities, ensuring convenient access to a reliable air supply.

    It is important to note that when using air compressors for inflating tires, it is recommended to follow manufacturer guidelines and proper inflation techniques to ensure safety and avoid overinflation.

    air compressor

    What are the key components of an air compressor system?

    An air compressor system consists of several key components that work together to generate and deliver compressed air. Here are the essential components:

    1. Compressor Pump: The compressor pump is the heart of the air compressor system. It draws in ambient air and compresses it to a higher pressure. The pump can be reciprocating (piston-driven) or rotary (screw, vane, or scroll-driven) based on the compressor type.

    2. Electric Motor or Engine: The electric motor or engine is responsible for driving the compressor pump. It provides the power necessary to operate the pump and compress the air. The motor or engine’s size and power rating depend on the compressor’s capacity and intended application.

    3. Air Intake: The air intake is the opening or inlet through which ambient air enters the compressor system. It is equipped with filters to remove dust, debris, and contaminants from the incoming air, ensuring clean air supply and protecting the compressor components.

    4. Compression Chamber: The compression chamber is where the actual compression of air takes place. In reciprocating compressors, it consists of cylinders, pistons, valves, and connecting rods. In rotary compressors, it comprises intermeshing screws, vanes, or scrolls that compress the air as they rotate.

    5. Receiver Tank: The receiver tank, also known as an air tank, is a storage vessel that holds the compressed air. It acts as a buffer, allowing for a steady supply of compressed air during peak demand periods and reducing pressure fluctuations. The tank also helps separate moisture from the compressed air, allowing it to condense and be drained out.

    6. Pressure Relief Valve: The pressure relief valve is a safety device that protects the compressor system from over-pressurization. It automatically releases excess pressure if it exceeds a predetermined limit, preventing damage to the system and ensuring safe operation.

    7. Pressure Switch: The pressure switch is an electrical component that controls the operation of the compressor motor. It monitors the pressure in the system and automatically starts or stops the motor based on pre-set pressure levels. This helps maintain the desired pressure range in the receiver tank.

    8. Regulator: The regulator is a device used to control and adjust the output pressure of the compressed air. It allows users to set the desired pressure level for specific applications, ensuring a consistent and safe supply of compressed air.

    9. Air Outlet and Distribution System: The air outlet is the point where the compressed air is delivered from the compressor system. It is connected to a distribution system comprising pipes, hoses, fittings, and valves that carry the compressed air to the desired application points or tools.

    10. Filters, Dryers, and Lubricators: Depending on the application and air quality requirements, additional components such as filters, dryers, and lubricators may be included in the system. Filters remove contaminants, dryers remove moisture from the compressed air, and lubricators provide lubrication to pneumatic tools and equipment.

    These are the key components of an air compressor system. Each component plays a crucial role in the generation, storage, and delivery of compressed air for various industrial, commercial, and personal applications.

    China OEM 75kw Motorized Mobile Portable Screw Air Compressor with Cooling Fan and 2 Air Tanks   mini air compressorChina OEM 75kw Motorized Mobile Portable Screw Air Compressor with Cooling Fan and 2 Air Tanks   mini air compressor
    editor by CX 2024-05-06

    China wholesaler 30HP Combined Rotary Screw Air Compressor with Receiver and Dryer air compressor parts

    Product Description

     

    Model LGPM-10HP LGPM-15HP LGPM-20HP LGPM-30HP LGPM-50HP LGPM-60HP
    Motor Power(KW) 7.5 11 15 22 37 45
    Capacity/Pressure
    (m3/min/MPa)
    1.2/0.7 1.71/0.7 2.3/0.7 3.8/0.7 6.4/0.7 8.5/0.7
    1.1/0.8 1.65/0.8 2.25/0.8 3.6/0.8 6.2/0.8 8.0/0.8
    0.9/1.0 1.32/1.0 1.8/1.0 3.0/1.0 5.6/1.0 7.5/1.0
    0.8/1.2 1.1/1.2 1.6/1.2 2.6/1.2 5.0/1.2 7.0/1.2
    LubricLGPMing oil(L) 12 16 16 22 26 26
    Noise db(A) 60-70±2 60-70±2 60-70±2 60-70±2 60-70±2 60-70±2
    Length(mm) 780 1050 1050 1300 1470 1460
    Width(mm) 600 700 700 850 1000 1000
    Height(mm) 1571 1150 1150 1100 1380 1380
    Weight(Kg) 215 335 335 465 630 825
     
    Model LGPM-75HP LGPM-100HP LGPM-125HP LGPM-150HP LGPM-175HP LGPM-200HP
    Motor Power(KW) 55 75 90 110 132 160
    Capacity/Pressure
    (m3/min/MPa)
    10.5/0.7 13.2/0.7 16.2/0.7 21.0/0.7 24.6/0.7 31.0/0.7
    10.0/0.8 13.0/0.8 15.8/0.8 20.0/0.8 23.0/0.8 30.0/0.8
    8.5/1.0 10.9/1.0 14.0/1.0 18.0/1.0 21.0/1.0 26.0/1.0
    7.6/1.2 9.8/1.2 12.8/1.2 16.0/1.2 18.8/1.2 22.0/1.2
    LubricLGPMing oil(L) 54 54 72 90 90 90
    Noise db(A) 70-76±2 70-76±2 70-76±2 70-76±2 70-76±2 70-76±2
    Length(mm) 1900 1900 1900 2571 2571 2360
    Width(mm) 1250 1250 1250 1590 1590 1610
    Height(mm) 1600 1600 1600 1810 1810 1860
    Weight(Kg) 1130 1230 1325 1520 1710 185

    ZheJiang Compressor Import & Export Co.,Ltd. is located in the logistics capital of China, 1 of the important
    birthplaces of Chinese civilization-HangZhou, ZheJiang Province.
    With professinal manufacturing experience and first -class comprehensive scientific and technological strength of the talent team, as the energy-saving compressor system leader and remowed in the industry.
    We specializes in R & D and sales of power frequency ,permanent magnet frequency conversion ,two -stage compressor permanent magnet frequency conversion ,low -voltage and mobile screw air compressor . With a deep industry background , 1 step ahead ambition .
    With the professional enthusiasm for screw air compressor , team innovation , to meat the challenges of enterprise’s
    own determination and the rigorous attitude of excellence,products are strictly in accordance with IOS 9001 international quality procedures,to provide customers with energy -saving and reliable products .
    We warmly welcomes people from all around the world to visit the company to guide the establishment of a wide range of business contacts and cooperation .
    Choosing ZheJiang Compressor Import & Export Co.,Ltd.is to choose quality and service ,choose culture and taste ,choose a permanent and trustworthy partner !

    RFQ:

    Q1: Are you factory or trade company?
    A1: We are factory. Please check Our Company Profile.

    Q2: What the exactly address of your factory?
    A2: Xihu (West Lake) Dis. Innovation Park, Zaoyuan Town, HangZhou, ZheJiang , China

    Q3: Warranty terms of your machine?
    A3: 18 months warranty for the machine,technical support according to your needs.

    Q4: Will you provide some spare parts of the machines?
    A4: Yes.

    Q5: How long will you take to arrange production?
    A5: Deliver standard goods within 30days, Other customized goods is TBD.

    Q6: Can you accept OEM orders?
    A6: Yes, with professional design team, OEM orders are highly welcome.

     

    Lubrication Style: Oil-less
    Cooling System: Air Cooling
    Power Source: AC Power
    Cylinder Position: Horizontal
    Structure Type: Closed Type
    Installation Type: Stationary Type
    Customization:
    Available

    |

    air compressor

    What are the advantages of using rotary vane compressors?

    Rotary vane compressors offer several advantages that make them a popular choice for various applications. These compressors are widely used in industries where a reliable and efficient source of compressed air is required. Here are the advantages of using rotary vane compressors:

    1. Compact and Lightweight:

    Rotary vane compressors are typically compact and lightweight compared to other types of compressors. Their compact design makes them suitable for installations where space is limited, such as in small workshops or mobile applications. The lightweight nature of these compressors allows for easy transportation and maneuverability.

    2. High Efficiency:

    Rotary vane compressors are known for their high efficiency. The design of the vanes and the compression chamber allows for smooth and continuous compression, resulting in minimal energy losses. This efficiency translates into lower energy consumption and reduced operating costs over time.

    3. Quiet Operation:

    Rotary vane compressors operate with relatively low noise levels. The design of the compressor, including the use of vibration damping materials and sound insulation, helps to minimize noise and vibrations during operation. This makes rotary vane compressors suitable for applications where noise reduction is important, such as in indoor environments or noise-sensitive areas.

    4. Oil Lubrication:

    Many rotary vane compressors utilize oil lubrication, which provides several benefits. The oil lubrication helps to reduce wear and friction between the moving parts, resulting in extended compressor life and improved reliability. It also contributes to better sealing and improved efficiency by minimizing internal leakage.

    5. Versatile Applications:

    Rotary vane compressors are versatile and can be used in a wide range of applications. They are suitable for both industrial and commercial applications, including automotive workshops, small manufacturing facilities, dental offices, laboratories, and more. They can handle various compressed air requirements, from light-duty tasks to more demanding applications.

    6. Easy Maintenance:

    Maintenance of rotary vane compressors is relatively straightforward. Routine maintenance tasks typically include oil changes, filter replacements, and periodic inspection of vanes and seals. The simplicity of the design and the availability of replacement parts make maintenance and repairs easier and more cost-effective.

    These advantages make rotary vane compressors an attractive choice for many applications, providing reliable and efficient compressed air solutions.

    air compressor

    What are the environmental considerations when using air compressors?

    When using air compressors, there are several environmental considerations to keep in mind. Here’s an in-depth look at some of the key factors:

    Energy Efficiency:

    Energy efficiency is a crucial environmental consideration when using air compressors. Compressing air requires a significant amount of energy, and inefficient compressors can consume excessive power, leading to higher energy consumption and increased greenhouse gas emissions. It is important to choose energy-efficient air compressors that incorporate features such as Variable Speed Drive (VSD) technology and efficient motor design, as they can help minimize energy waste and reduce the carbon footprint.

    Air Leakage:

    Air leakage is a common issue in compressed air systems and can contribute to energy waste and environmental impact. Leaks in the system result in the continuous release of compressed air, requiring the compressor to work harder and consume more energy to maintain the desired pressure. Regular inspection and maintenance of the compressed air system to detect and repair leaks can help reduce air loss and improve overall energy efficiency.

    Noise Pollution:

    Air compressors can generate significant noise levels during operation, which can contribute to noise pollution. Prolonged exposure to high noise levels can have detrimental effects on human health and well-being and can also impact the surrounding environment and wildlife. It is important to consider noise reduction measures such as sound insulation, proper equipment placement, and using quieter compressor models to mitigate the impact of noise pollution.

    Emissions:

    While air compressors do not directly emit pollutants, the electricity or fuel used to power them can have an environmental impact. If the electricity is generated from fossil fuels, the associated emissions from power plants contribute to air pollution and greenhouse gas emissions. Choosing energy sources with lower emissions, such as renewable energy, can help reduce the environmental impact of operating air compressors.

    Proper Waste Management:

    Proper waste management is essential when using air compressors. This includes the appropriate disposal of compressor lubricants, filters, and other maintenance-related materials. It is important to follow local regulations and guidelines for waste disposal to prevent contamination of soil, water, or air and minimize the environmental impact.

    Sustainable Practices:

    Adopting sustainable practices can further reduce the environmental impact of using air compressors. This can include implementing preventive maintenance programs to optimize performance, reducing idle time, and promoting responsible use of compressed air by avoiding overpressurization and optimizing system design.

    By considering these environmental factors and taking appropriate measures, it is possible to minimize the environmental impact associated with the use of air compressors. Choosing energy-efficient models, addressing air leaks, managing waste properly, and adopting sustainable practices can contribute to a more environmentally friendly operation.

    air compressor

    What maintenance is required for air compressors?

    Maintaining air compressors is essential to ensure their optimal performance, longevity, and safe operation. Regular maintenance helps prevent breakdowns, improves efficiency, and reduces the risk of accidents. Here are some key maintenance tasks for air compressors:

    1. Regular Inspection: Perform visual inspections of the air compressor to identify any signs of wear, damage, or leaks. Inspect the compressor, hoses, fittings, and connections for any abnormalities. Pay attention to oil leaks, loose bolts, and worn-out components.

    2. Oil Changes: If your air compressor has an oil lubrication system, regular oil changes are crucial. Follow the manufacturer’s recommendations for the frequency of oil changes and use the recommended oil type. Dirty or degraded oil can impact compressor performance and lead to premature wear.

    3. Air Filter Cleaning or Replacement: Clean or replace the air filter regularly to ensure proper air intake and prevent contaminants from entering the compressor. Clogged or dirty filters can restrict airflow and reduce efficiency.

    4. Drain Moisture: Air compressors produce moisture as a byproduct of the compression process. Accumulated moisture in the tank can lead to rust and corrosion. Drain the moisture regularly from the tank to prevent damage. Some compressors have automatic drains, while others require manual draining.

    5. Belt Inspection and Adjustment: If your compressor has a belt-driven system, inspect the belts for signs of wear, cracks, or tension issues. Adjust or replace the belts as necessary to maintain proper tension and power transmission.

    6. Tank Inspection: Inspect the compressor tank for any signs of corrosion, dents, or structural issues. A damaged tank can be hazardous and should be repaired or replaced promptly.

    7. Valve Maintenance: Check the safety valves, pressure relief valves, and other valves regularly to ensure they are functioning correctly. Test the valves periodically to verify their proper operation.

    8. Motor and Electrical Components: Inspect the motor and electrical components for any signs of damage or overheating. Check electrical connections for tightness and ensure proper grounding.

    9. Keep the Area Clean: Maintain a clean and debris-free area around the compressor. Remove any dirt, dust, or obstructions that can hinder the compressor’s performance or cause overheating.

    10. Follow Manufacturer’s Guidelines: Always refer to the manufacturer’s manual for specific maintenance instructions and recommended service intervals for your air compressor model. They provide valuable information on maintenance tasks, lubrication requirements, and safety precautions.

    Regular maintenance is vital to keep your air compressor in optimal condition and extend its lifespan. It’s also important to note that maintenance requirements may vary depending on the type, size, and usage of the compressor. By following a comprehensive maintenance routine, you can ensure the reliable operation of your air compressor and maximize its efficiency and longevity.

    China wholesaler 30HP Combined Rotary Screw Air Compressor with Receiver and Dryer   air compressor partsChina wholesaler 30HP Combined Rotary Screw Air Compressor with Receiver and Dryer   air compressor parts
    editor by CX 2023-11-13

    China Hot selling Germany Silent Portable Rotary Screw Type Oil Lubricated Air Cooled Compressor Belt / Direct Driven 7.5kw 11kw 15kw 18.5kw 22kw with Dryer, Filters and Tank small air compressor

    Product Description

    Product Description

     

    Model Air Flow (m³/min) Motor Power Noise Tank Volume Outlet Diameter Dimension Weight
    7bar 8bar 10bar 13bar kw dB L inch W*D*H  (mm) kg
    YC-7.5A 1.0 0.8 0.5 0.4 5.5 65 300 G3/4” 1650*730*1530 655
    YC-10A 1.1 1.0 0.85 0.7 7.5 65 300 G3/4” 1650*730*1530 680
    YC-15A 1.8 1.65 1.5 1.3 11 65 500 G1” 1955*800*1800 785
    YC-20A 2.4 2.2 2.1 1.8 15 68 500 G1” 1955*800*1800 810
    YC-25A 3.1 3.0 2.7 2.3 18.5 68 500 G1” 1960*1070*2012 910
    YC-30A 3.8 3.6 3.2 2.5 22 68 500 G11/2” 1960*1070*2012 930
    Remarks:
    1. working ambinent temperature: -5ºC-45ºC;
    2. exhausting air temperature ≤  working ambinent temperature +10ºC-15ºC;
    3. starting mode: Y-△;
    4. exhausting oil content: <3ppm;
     5. certificate:  CE/ISO9001/ASME; 
     6. voltage:  380V/220V/400V/440V/415V 

    Brief Introduction:
    Air end: German Technology. 30 years designed lifetime.
    Motor: 100% rare earth permanent magnet motor. 
    Inverter: Chinese No. 1 inverter can save 30% energy.
    Warranty: 5 years for the air end, and 2 years for the whole compressor. 
    Delivery time: 7-15 days. 
    After-sales service:we have our professional after-sales technician to instruct the installation of the whole screw air compressor.    
    We offer free pipe and valves for installation and installation diagram

    Porduct Features:

    1. Combined air compressor is integrated with air compressor, air dryer, filters and air tank.

    2. Easy to use. Users can use high-quality compressed air when connected it to the power supply.

    3. Complete system with no additional drying system or no connection piping installation cost.

    4.It’s convenient for use and movement.

    Detailed Photos

    Porduct Advantages

    1. Air end of screw air compressor
    The air end is with state-of-the art screw element and 4 -6 SKF bearings to make sure it plenty of air output and longer lifetime. 
    2.Electric Motor of the air compressor
     Name brand qualified IP54/55 ,F insulation, IE2 , IE3 motor , high efficiency and energy saving.  
    3. Intake valve of the screw air compressor 
     High efficiency intake valve protects the compressor components  by removing 99% dirty particles down to 3 microns.
    4. Oil Air separator 
     High efficiency separating for oil and air and low oil content in the compressed air. 
    5. Touch Screen Controller.
    6. High efficient Centrifugal fan can give best cooling for screw compressor.
    7.Dust proof mesh to protect electrical control system 

    Manufacturing center

    Certifications

    Product Case

    Use case of rotary screw type air compressor
    1. Rotary Screw type air compressors are exported to 132 countries and regions all over the world;
    2. All indicators of screw air compressor are stable and the failure rate is low;
    3. Perfect after-sales service system, engineers on duty 24 hours a day to provide one-on-1 service to customers at the air compressor use site.

    QC Management

     

    Re-factory quality control process:
    1.Installation inspection of the whole air compressor: check and confirm the whole machine according to the operation instructions and quality control standards. Main inspection items:
    A . Confirm the nose and motor nameplates; 
    B . Check whether there is oil leakage in the pipeline and oil circuit of the air compressor; C . the air compressor machine screw locking inspection..
    2. Rotary screw type air compressor factory test machine, heat engine: test whether the air compressor operation parameters meet the requirements of customers, including voltage, current, working pressure, exhaust volume, etc.Air compressor factory before 48 hours of thermal test, stability confirmation.
    3. 24 hours online after-sales service, one-to-1 online guidance installation, debugging, troubleshooting.

    Packaging & Shipping

     

    Rotary Screw type Air compressor packing method
    1. Screw air compressor packaging is divided into 3 layers from inside to outside:
    1) The first layer of protection: spray paint on the surface of the machine to protect the surface of the machine. The fouling pull film is wrapped around the surface of the machine to protect the surface of the paint.
    2) The second layer of protection: anti-collision protection of the machine. On the basis of lacquer protection, anti-collision buffer cotton is used to protect the machine against collision.
    3) The third layer of protection: the case adopts the overall packaging of the non-fumigation wooden case to protect the machine during transportation.

    F.A.Q

    Q1. Why do customers choose us?
    Yunshun Electric Machinery Co., Ltd. is a company specializing in screw air compressor for 18 years since 2001. Our German Standard production line helps us get the affirmation from our agents as well as end-user clients.

    Q2. Are you a manufacturer or trading company?
    We are a professional manufacturer with big modern factory in HangZhou,China.
    Both OEM & ODM service can be accepted.

    Q3. What’s your delivery time?
    Generally 7-10 days, if urgent order, we can arrange, too.

    Q4. How long is your air compressor warranty?
    2 year for the whole machine and 5years for screw air end, except consumable spare parts.

     Q5. How long could your air compressor be used for? 
    At least 10 years.

    Q6. What’s payment term?
    T/T, L/C, Western Union, Credit Card, and etc.

    Q7. How about your customer service?
    24 hours on-line service for all our clients.

    Q8. How about your after-sales service?
    1. Providing customers with installation online instructions.
    2. Well-trained engineers available to overseas service.
    3. PlHangZhou for oversea after-sales supporting company.

     

    After-sales Service: 5 Years for The Air End, and 2 Years for The Whole
    Warranty: 2 Years
    Lubrication Style: Lubricated
    Cooling System: Air Cooling
    Power Source: AC Power
    Cylinder Position: Horizontal
    Customization:
    Available

    |

    air compressor

    What are the energy-saving technologies available for air compressors?

    There are several energy-saving technologies available for air compressors that help improve their efficiency and reduce energy consumption. These technologies aim to optimize the operation of air compressors and minimize energy losses. Here are some common energy-saving technologies used:

    1. Variable Speed Drive (VSD) Compressors:

    VSD compressors are designed to adjust the motor speed according to the compressed air demand. By varying the motor speed, these compressors can match the output to the actual air requirement, resulting in energy savings. VSD compressors are particularly effective in applications with varying air demands, as they can operate at lower speeds during periods of lower demand, reducing energy consumption.

    2. Energy-Efficient Motors:

    The use of energy-efficient motors in air compressors can contribute to energy savings. High-efficiency motors, such as those with premium efficiency ratings, are designed to minimize energy losses and operate more efficiently than standard motors. By using energy-efficient motors, air compressors can reduce energy consumption and achieve higher overall system efficiency.

    3. Heat Recovery Systems:

    Air compressors generate a significant amount of heat during operation. Heat recovery systems capture and utilize this wasted heat for other purposes, such as space heating, water heating, or preheating process air or water. By recovering and utilizing the heat, air compressors can provide additional energy savings and improve overall system efficiency.

    4. Air Receiver Tanks:

    Air receiver tanks are used to store compressed air and provide a buffer during periods of fluctuating demand. By using appropriately sized air receiver tanks, the compressed air system can operate more efficiently. The tanks help reduce the number of starts and stops of the air compressor, allowing it to run at full load for longer periods, which is more energy-efficient than frequent cycling.

    5. System Control and Automation:

    Implementing advanced control and automation systems can optimize the operation of air compressors. These systems monitor and adjust the compressed air system based on demand, ensuring that only the required amount of air is produced. By maintaining optimal system pressure, minimizing leaks, and reducing unnecessary air production, control and automation systems help achieve energy savings.

    6. Leak Detection and Repair:

    Air leaks in compressed air systems can lead to significant energy losses. Regular leak detection and repair programs help identify and fix air leaks promptly. By minimizing air leakage, the demand on the air compressor is reduced, resulting in energy savings. Utilizing ultrasonic leak detection devices can help locate and repair leaks more efficiently.

    7. System Optimization and Maintenance:

    Proper system optimization and routine maintenance are essential for energy savings in air compressors. This includes regular cleaning and replacement of air filters, optimizing air pressure settings, ensuring proper lubrication, and conducting preventive maintenance to keep the system running at peak efficiency.

    By implementing these energy-saving technologies and practices, air compressor systems can achieve significant energy efficiency improvements, reduce operational costs, and minimize environmental impact.

    air compressor

    What is the energy efficiency of modern air compressors?

    The energy efficiency of modern air compressors has significantly improved due to advancements in technology and design. Here’s an in-depth look at the energy efficiency features and factors that contribute to the efficiency of modern air compressors:

    Variable Speed Drive (VSD) Technology:

    Many modern air compressors utilize Variable Speed Drive (VSD) technology, also known as Variable Frequency Drive (VFD). This technology allows the compressor motor to adjust its speed according to the compressed air demand. By matching the motor speed to the required airflow, VSD compressors can avoid excessive energy consumption during periods of low demand, resulting in significant energy savings compared to fixed-speed compressors.

    Air Leakage Reduction:

    Air leakage is a common issue in compressed air systems and can lead to substantial energy waste. Modern air compressors often feature improved sealing and advanced control systems to minimize air leaks. By reducing air leakage, the compressor can maintain optimal pressure levels more efficiently, resulting in energy savings.

    Efficient Motor Design:

    The motor of an air compressor plays a crucial role in its energy efficiency. Modern compressors incorporate high-efficiency electric motors that meet or exceed established energy efficiency standards. These motors are designed to minimize energy losses and operate more efficiently, reducing overall power consumption.

    Optimized Control Systems:

    Advanced control systems are integrated into modern air compressors to optimize their performance and energy consumption. These control systems monitor various parameters, such as air pressure, temperature, and airflow, and adjust compressor operation accordingly. By precisely controlling the compressor’s output to match the demand, these systems ensure efficient and energy-saving operation.

    Air Storage and Distribution:

    Efficient air storage and distribution systems are essential for minimizing energy losses in compressed air systems. Modern air compressors often include properly sized and insulated air storage tanks and well-designed piping systems that reduce pressure drops and minimize heat transfer. These measures help to maintain a consistent and efficient supply of compressed air throughout the system, reducing energy waste.

    Energy Management and Monitoring:

    Some modern air compressors feature energy management and monitoring systems that provide real-time data on energy consumption and performance. These systems allow operators to identify energy inefficiencies, optimize compressor settings, and implement energy-saving practices.

    It’s important to note that the energy efficiency of an air compressor also depends on factors such as the specific model, size, and application. Manufacturers often provide energy efficiency ratings or specifications for their compressors, which can help in comparing different models and selecting the most efficient option for a particular application.

    Overall, modern air compressors incorporate various energy-saving technologies and design elements to enhance their efficiency. Investing in an energy-efficient air compressor not only reduces operational costs but also contributes to sustainability efforts by minimizing energy consumption and reducing carbon emissions.

    air compressor

    How does an air compressor work?

    An air compressor works by using mechanical energy to compress and pressurize air, which is then stored and used for various applications. Here’s a detailed explanation of how an air compressor operates:

    1. Air Intake: The air compressor draws in ambient air through an intake valve or filter. The air may pass through a series of filters to remove contaminants such as dust, dirt, and moisture, ensuring the compressed air is clean and suitable for its intended use.

    2. Compression: The intake air enters a compression chamber, typically consisting of one or more pistons or a rotating screw mechanism. As the piston moves or the screw rotates, the volume of the compression chamber decreases, causing the air to be compressed. This compression process increases the pressure and reduces the volume of the air.

    3. Pressure Build-Up: The compressed air is discharged into a storage tank or receiver where it is held at a high pressure. The tank allows the compressed air to be stored for later use and helps to maintain a consistent supply of compressed air, even during periods of high demand.

    4. Pressure Regulation: Air compressors often have a pressure regulator that controls the output pressure of the compressed air. This allows the user to adjust the pressure according to the requirements of the specific application. The pressure regulator ensures that the compressed air is delivered at the desired pressure level.

    5. Release and Use: When compressed air is needed, it is released from the storage tank or receiver through an outlet valve or connection. The compressed air can then be directed to the desired application, such as pneumatic tools, air-operated machinery, or other pneumatic systems.

    6. Continued Operation: The air compressor continues to operate as long as there is a demand for compressed air. When the pressure in the storage tank drops below a certain level, the compressor automatically starts again to replenish the compressed air supply.

    Additionally, air compressors may include various components such as pressure gauges, safety valves, lubrication systems, and cooling mechanisms to ensure efficient and reliable operation.

    In summary, an air compressor works by drawing in air, compressing it to increase its pressure, storing the compressed air, regulating the output pressure, and releasing it for use in various applications. This process allows for the generation of a continuous supply of compressed air for a wide range of industrial, commercial, and personal uses.

    China Hot selling Germany Silent Portable Rotary Screw Type Oil Lubricated Air Cooled Compressor Belt / Direct Driven 7.5kw 11kw 15kw 18.5kw 22kw with Dryer, Filters and Tank   small air compressor China Hot selling Germany Silent Portable Rotary Screw Type Oil Lubricated Air Cooled Compressor Belt / Direct Driven 7.5kw 11kw 15kw 18.5kw 22kw with Dryer, Filters and Tank   small air compressor
    editor by CX 2023-10-30