China Custom General Industrial Mobile Portable Diesel Direct Drive Screw Air Compressor Manufacturer supplier

Product Description

1.Gas Control System: It is simple and reliable. Inlet rate from 0 to 100% and be adjusted automatically depending on the gas consumption. Automatically adjust the engine throttle to save diesel fuel.

2.Microcomputor Intelligent Control: Air compressor discharge pressure, exhaust gas temperature, engine speed, oil pressure, water temperature and fuel tank level operating parameters with automatic alarm and shutdown protection.

3.Multi-Stage Air Filter and Large Oil-Water Cooler: It is not only suitable for dusty work environment, but it is suitable for high temperature and high altitude environment.

4.Parts and Components: They can be maintained within the accesible range which is convenient and easy.

5.Covenient: Easy to move in rough terrain.Each compressor has lifting rings on the top for safe hoisting and transportation.

Product Parameters

Single Stage Compression Portable Diesel Screw Air Compressor
Model	Capacity	Pressure	Diesel engine type	Weight	Dimensions
Model	m3/min	bar	Diesel engine type	KGS	L×W×H mm
SYC-3/7	2.8	7	32kw	1000	220015601400
SYC-5/7	5	7	41KW	1100	2821X1470X1361
SYC-6/8	6	8	55kW	1400	3750×1920×1700
SYC-7/8	7	8	4D80-K20,58kW	1400	3750×1920×1700
SYC-8/7	8	7	65kw	1400	3750×1920×1700
SYC-8/8	8	8	65kw	1400	3750×1920×1700
SYC-9/8	8.8	8	75kW	1600	3750×1920×1700
SYC-10/7	10	7	YC4D95Z-K20,70kW	1900	3900×1920×1700
SYC-8.5/14	8.5	14	4BTA3.9-C125,93kW	1900	3900×1920×1900
SYC-10/10	10	10	4BTA3.9-C125,93kW	1900	3900×1920×1900
SYC-10/13	10	13	4BTA3.9-C125,93kW	2050	4080×1980×2350
SYC-13/10	13	10	4BTA3.9-C125,93kW	2050	4080×1980×2350
SYC-12/7	12	7	4BTA3.9-C125,93kW	2050	3900×1980×1900
SYC-12/12	12	12	6BTA5.9-C180,132kW	2380	4080×1980×2350
SYC-12/13	12	13	6BTA5.9-C180,132kW	2750	4080×1980×2350
SYC-13/13	13	13	6BTA5.9-C180,132kW	2750	3450×1520×2220
SYC-17/7	17	7	6BTA5.9-C180,132kW	3350	3380×1640×2350
SYC-15/13	15	13	YC6A240-20,177kW	3350	3380×1650×2500
SYC-16/13	16	13	6CTA8.3-C215,158kW	3350	3980×1800×2450
SYC-13/17	13	17	6CTA8.3-C215,158kW	3400	3780×1980×2350
SYC-17/14.5	17	14.5	6CTA8.3-C260,194kW	3400	3980×1800×2450
SYC-19/14.5	19	14.5	6CTA8.3-C260,194kW	3400	3980×1800×2450
SYC-18/17	18	17	6CTA8.3-C260,194kW	3400	3980×1800×2450
SYC-20/13	20	13	6CTA8.3-C260,194kW	3400	3980×1800×2450
SYC-22/8	22	8	6CTA8.3-C260,194kW	4000	4580×1950×2600
SYC-26/8	26	8	6CTA8.3-C260,194kW	4000	4580×1950×2600
SYC-22/14	22	14	6CTA8.9-C325, 239kW	4500	4580×1950×2600
SYC-27/10	27	10	6CTA8.9-C325, 239kW	5000	4600×1950×2850
SYC-30/10	30	10	6CTA8.9-C325, 240kW	5000	4600×1950×2850
Two Stages Compression Portable Diesel Screw Air Compressor
SYC-19.5/19	19.5	19	6CTA8.3-C260,194KW	3700	365018002500
SYC-22/20	22	20	6LTA8.9-C360,265KW	4500	460019502850
SYC-26/20	26	20	6LTA8.9-C360,265KW	4850	460019502850
SYC-27/22	27	22	NTA855-P400	5000	460019502850
SYC-26/25	26	25	QSZ13-C500	5100	470021002500
SYC-21/35	21	35	QSZ13-C500	5100	470021002500
SYC-33/25	33	25	QSZ13-C550	5200	470021002500
SYC-26/35	26	35	QSZ13-C550	5200	470021002500

Company Profile

After Sales Service

Our service
1.Pre-sale service:
Act as a good adviser and assistant of clients enable them to get rich and generous returns on their investments .
1.Select equipment model.
2.Design and manufacture products according to client’s special requirement ;
2.Services during the sale:
1.Pre-check and accept products ahead of delivery .
2. Help clients to draft solving plans .
3.After-sale services:
Provide considerate services to minimize clients’ worries.
1.Complete After-sales service,professional engineers available to service machinery at home or oversea.
(On-site service requires the customer to bear the cost)
2. 24 hours technical support by e-mail.
3.Other essential technological service.

FAQ

Q1: What is the rotor speed for the air end?
A1: 2980rmp.
Q2: What’s your lead time?
A2: usually, 5-7 days. (OEM orders: 15days)
Q3: Can you offer water cooled air compressor?
A3: Yes, we can (normally, air cooled type).
Q4: What’s the payment term?
A4: T/T, L/C, Western Union, etc. Also we could accept USD, RMB, and other currency.
Q5: Do you accept customized voltage?
A5: Yes. 380V/50Hz/3ph, 380V/60Hz/3ph, 220V/50Hz/3ph, 220V/60Hz/3ph, 440V/50Hz/3ph, 440V/60Hz/3ph, or as per your requests.
Q6: What is your warranty for air compressor?
A6: One year for the whole air compressor(not including the consumption spare parts) and technical supports can be provided according to your needs.
Q7: Can you accept OEM orders?
A7: Yes, OEM orders are warmly welcome.
Q8: How about your customer service and after-sales service?
A8: 24hrs on-line support, 48hrs problem solved promise.
Q9: Do you have spare parts in stock?
A9: Yes, we do.
Q10: What kind of initial lubrication oil you used in air compressor?
A10: TOTAL 46# mineral oil.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Online Technical Support
Warranty:	1 Year
Lubrication Style:	Lubricated

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

What are the differences between stationary and portable air compressors?

Stationary and portable air compressors are two common types of air compressors with distinct features and applications. Here are the key differences between them:

1. Mobility:

The primary difference between stationary and portable air compressors is their mobility. Stationary air compressors are designed to be permanently installed in a fixed location, such as a workshop or a factory. They are typically larger, heavier, and not easily movable. On the other hand, portable air compressors are smaller, lighter, and equipped with handles or wheels for easy transportation. They can be moved from one location to another, making them suitable for jobsites, construction sites, and other mobile applications.

2. Power Source:

Another difference lies in the power source used by stationary and portable air compressors. Stationary compressors are usually powered by electricity, as they are designed for continuous operation in a fixed location with access to power outlets. They are connected to the electrical grid or have dedicated wiring. In contrast, portable compressors are available in various power options, including electric, gasoline, and diesel engines. This versatility allows them to operate in remote areas or sites without readily available electricity.

3. Tank Capacity:

Tank capacity is also a distinguishing factor between stationary and portable air compressors. Stationary compressors often have larger storage tanks to store compressed air for extended periods. The larger tanks enable them to deliver a continuous and steady supply of compressed air for longer durations without the need for frequent cycling. Portable compressors, due to their compact size and portability, generally have smaller tank capacities, which may be sufficient for intermittent or smaller-scale applications.

4. Performance and Output:

The performance and output capabilities of stationary and portable air compressors can vary. Stationary compressors are typically designed for high-volume applications that require a consistent and continuous supply of compressed air. They often have higher horsepower ratings, larger motor sizes, and higher air delivery capacities. Portable compressors, while generally offering lower horsepower and air delivery compared to their stationary counterparts, are still capable of delivering sufficient air for a range of applications, including pneumatic tools, inflation tasks, and light-duty air-powered equipment.

5. Noise Level:

Noise level is an important consideration when comparing stationary and portable air compressors. Stationary compressors, being larger and built for industrial or commercial settings, are often equipped with noise-reducing features such as sound insulation and vibration dampening. They are designed to operate at lower noise levels, which is crucial for maintaining a comfortable working environment. Portable compressors, while efforts are made to reduce noise, may produce higher noise levels due to their compact size and portability.

6. Price and Cost:

Stationary and portable air compressors also differ in terms of price and cost. Stationary compressors are generally more expensive due to their larger size, higher power output, and industrial-grade construction. They often require professional installation and may involve additional costs such as electrical wiring and system setup. Portable compressors, being smaller and more versatile, tend to have a lower upfront cost. They are suitable for individual users, contractors, and small businesses with budget constraints or flexible air supply needs.

When selecting between stationary and portable air compressors, it is essential to consider the specific requirements of the intended application, such as mobility, power source availability, air demands, and noise considerations. Understanding these differences will help in choosing the appropriate type of air compressor for the intended use.

air compressor

What are the environmental considerations when using air compressors?

When using air compressors, there are several environmental considerations to keep in mind. Here’s an in-depth look at some of the key factors:

Energy Efficiency:

Energy efficiency is a crucial environmental consideration when using air compressors. Compressing air requires a significant amount of energy, and inefficient compressors can consume excessive power, leading to higher energy consumption and increased greenhouse gas emissions. It is important to choose energy-efficient air compressors that incorporate features such as Variable Speed Drive (VSD) technology and efficient motor design, as they can help minimize energy waste and reduce the carbon footprint.

Air Leakage:

Air leakage is a common issue in compressed air systems and can contribute to energy waste and environmental impact. Leaks in the system result in the continuous release of compressed air, requiring the compressor to work harder and consume more energy to maintain the desired pressure. Regular inspection and maintenance of the compressed air system to detect and repair leaks can help reduce air loss and improve overall energy efficiency.

Noise Pollution:

Air compressors can generate significant noise levels during operation, which can contribute to noise pollution. Prolonged exposure to high noise levels can have detrimental effects on human health and well-being and can also impact the surrounding environment and wildlife. It is important to consider noise reduction measures such as sound insulation, proper equipment placement, and using quieter compressor models to mitigate the impact of noise pollution.

Emissions:

While air compressors do not directly emit pollutants, the electricity or fuel used to power them can have an environmental impact. If the electricity is generated from fossil fuels, the associated emissions from power plants contribute to air pollution and greenhouse gas emissions. Choosing energy sources with lower emissions, such as renewable energy, can help reduce the environmental impact of operating air compressors.

Proper Waste Management:

Proper waste management is essential when using air compressors. This includes the appropriate disposal of compressor lubricants, filters, and other maintenance-related materials. It is important to follow local regulations and guidelines for waste disposal to prevent contamination of soil, water, or air and minimize the environmental impact.

Sustainable Practices:

Adopting sustainable practices can further reduce the environmental impact of using air compressors. This can include implementing preventive maintenance programs to optimize performance, reducing idle time, and promoting responsible use of compressed air by avoiding overpressurization and optimizing system design.

By considering these environmental factors and taking appropriate measures, it is possible to minimize the environmental impact associated with the use of air compressors. Choosing energy-efficient models, addressing air leaks, managing waste properly, and adopting sustainable practices can contribute to a more environmentally friendly operation.

air compressor

How does an air compressor work?

An air compressor works by using mechanical energy to compress and pressurize air, which is then stored and used for various applications. Here’s a detailed explanation of how an air compressor operates:

1. Air Intake: The air compressor draws in ambient air through an intake valve or filter. The air may pass through a series of filters to remove contaminants such as dust, dirt, and moisture, ensuring the compressed air is clean and suitable for its intended use.

2. Compression: The intake air enters a compression chamber, typically consisting of one or more pistons or a rotating screw mechanism. As the piston moves or the screw rotates, the volume of the compression chamber decreases, causing the air to be compressed. This compression process increases the pressure and reduces the volume of the air.

3. Pressure Build-Up: The compressed air is discharged into a storage tank or receiver where it is held at a high pressure. The tank allows the compressed air to be stored for later use and helps to maintain a consistent supply of compressed air, even during periods of high demand.

4. Pressure Regulation: Air compressors often have a pressure regulator that controls the output pressure of the compressed air. This allows the user to adjust the pressure according to the requirements of the specific application. The pressure regulator ensures that the compressed air is delivered at the desired pressure level.

5. Release and Use: When compressed air is needed, it is released from the storage tank or receiver through an outlet valve or connection. The compressed air can then be directed to the desired application, such as pneumatic tools, air-operated machinery, or other pneumatic systems.

6. Continued Operation: The air compressor continues to operate as long as there is a demand for compressed air. When the pressure in the storage tank drops below a certain level, the compressor automatically starts again to replenish the compressed air supply.

Additionally, air compressors may include various components such as pressure gauges, safety valves, lubrication systems, and cooling mechanisms to ensure efficient and reliable operation.

In summary, an air compressor works by drawing in air, compressing it to increase its pressure, storing the compressed air, regulating the output pressure, and releasing it for use in various applications. This process allows for the generation of a continuous supply of compressed air for a wide range of industrial, commercial, and personal uses.

China Custom General Industrial Mobile Portable Diesel Direct Drive Screw Air Compressor Manufacturer supplier
editor by CX 2024-05-22

China Custom Air Dryer / Combined Air Dryer / Air Cooled Refrigerated Combined Air Dryer Compressor for Sale with Great quality

Product Description

Air Dryer / Combined air dryer / Air cooled refrigerated combined air dryer compressor for sale

Detailed Photos

(1) Air-cooled combined dryer

Technological Process of the Combined Low Dew Point Compressed Air Dryer

Symbol	Name	Symbol	Name
1	Refrigerant Compressor	15	Air Pressure Gauge
2	Oil Separator	16	Heat Exchanger
3	Condenser	17	Pressure Relief Valve
4	Dryer Filter	18,19	Check Valve
5	Sight Lens	20,21	Check Valve(Heat Type)
6	Bulge Thermal Expansion Valve	22,23,24,25	Pneumatic Valve
7	Hot Gas Bypass Valve	26,29,30,33	Diffuser
8	Vaporizer	27,31	Air Pressure Gauge
9	Humidity Sensor	28,32	Adsorption Vessel
10	Evaporator	34,35,36,37	Pilot Solenoid Valve
11	Refrigerant Low Pressure Gauge	38	Muffler
12	Refrigerant Low Pressure Gauge	39	Flow Regulating Valve(Heatless Type)
13	High and Low Pressure Controller	40	Throttling Orifice Plate(Heat Type)
14	Gas Liquid Separator	41	Electical Heater(Heat Type)

General Introduction:
Commonly, there are 2 kinds of compressed air dryer: refrigerated compressed air dryer and regeneration adsorption one. The refrigerated compressed air dryer is quite energy-saving without any air loss, While it is limited by the dew point temperature. The regeneration adsorption compressed air dryer can reach a quiet low dew point, but it has the shortcoming of big air loss and high energy consumption.
The CHINAMFG combined low dew point compressed air dryer takes the maximum advantages of the above 2 kinds of dryers through reasonable pipeline connection and capacity matching, which ensure its economic operation and high quality of low dew point finished air.
Operating Principle:
Firstly, the hot and wet compressed air from the compressor is heat exchange with dried cold compressed air in the heat exchanger. Then it will be cooled down to about 2ºC by evaporator. Under this pressure dew point, the majority of vapor water in the compressed air is eliminated and discharged. After these processes, the low temperature air goes into the heat exchanger to cool the high wet compressed air, at the same time, itself temperature goes up in order to prevent the condensation of dew on the surface of pipelines. Last, low moisture compressed air dryer goes into the adsorption vessel to be further dried in order to get the good dew point.

(2) Water-Cooled Combined Type Air Dryer

Working condition and technical data
Maximum inlet air temperature:45ºC
Ambient temperature range:5-50ºC
Pressure range:0.6-1.0Mpa
Pressure dew point:-20ºC ~ -40ºC
Regeneration gas consumption:3-5%
Cooling mode: water cooling (industrial circulating cooling water)
Cooling water pressure range: 0.2-0.4mpa
Maximum cooling water inlet temperature: 38 ºC
Intake oil content: ≤ 0.1ppm
Power supply: 6-12nm 3 / min: AC 220 V / 50 Hz
15nm3 / min and above: AC 380V / 220V / 50Hz
Cycle: T = 40 (min)
Refrigerant: R22 (R407C / R134a optional)
Design condition: inlet temperature: 38 ºC
Ambient temperature: 38 ºC
Working pressure: 0.7MPa
Cooling water inlet temperature: 32 ºC
Pressure loss: ≤ 5% of design pressure
Note: the water-cooled equipment above 80 cubic CHINAMFG are split bare machines. Other special requirements are welcome to customize.

Product features

Low dew point:The combined low dew point dryer can reach very low pressure dew point, which can reach below – 40 ºC in general, and – 70 ºC at least according to different user requirements;
Low energy consumption: the regeneration gas consumption of combined low dew point dryer is only 3% – 5%, which greatly saves the compressed air consumption;
It can provide compressed air with different dew points for different air consumption points;
All the operation switches and display instruments of the combined low dew point compressed air dryer are concentrated on the panel of the box plate. The refrigeration type compressed air dryer and the adsorption regeneration compressed air dryer can operate independently or simultaneously with cold and suction according to the customer’s needs;
The gas-liquid separator adopts the patented three-stage separation mode: direct collision separation + low-speed centrifugal separation + stainless steel wire mesh demisting separation. 99.9% of liquid water is separated from the cooled compressed air. The second evaporation of textile moisture can ensure the low dew point quality of finished gas.
High quality switching valve, stable and reliable, can ensure the integrity of the working process and prolong the working life of components.
The refrigeration compressor adopts CHINAMFG of Denmark, CHINAMFG of ZheJiang , CHINAMFG of Japan, CHINAMFG of Germany, CHINAMFG of Germany, CHINAMFG of France and other companies of fully closed or semi closed refrigeration compressor, which has stable operation, low noise, high cop, reliable performance and long power saving life;

Product Parameters

(1) Air-Cooled Combined Type Air Dryer specification

Model Item	Air capacity (Nm³/min)	Desiccant weight(kg)	Air connector dia	Refrigerant power (HP)	Air flow (Nm³/h)	Fan power(W)	Voltage (V)	Dryer Net Weight (kg)	Length(mm)	Wideth(mm)	Height(mm)
SDZF-1	1.2	25	G1″	1/2	745	1×50	220	400	1080	850	1460
SDZF-2	2.5	40	G1″	1/2	745	1×50	220	440	1100	900	2050
SDZF-3	3.6	60	G1″	3/4	1330	1×100	220	460	1200	1000	1808
SDZF-4.5	5	85	G1 1/2″	1	2670	1×135	220	660	1290	1030	2263
SDZF-6	6.8	105	G1 1/2″	1.5	4500	1×230	220	775	1500	1105	1931
SDZF-8	8.5	150	G2″	2	5340	2×135	220	970	1500	1240	2016
SDZF-10	10.9	185	G2″	2.5	5340	2×135	220	1120	1500	1240	2316
SDZF-12	12.8	185	G2″	2.5	5340	2×135	220	1120	1500	1240	2316
SDZF-15	16	310	DN65	3	7600	2×190	380/220	1700	1960	1450	2342
SDZF-20	22	395	DN65	4	7600	2×190	380/220	1800	1980	1600	2408
SDZF-25	26.8	492	DN80	5	9000	2×230	380/220	2100	2270	1700	2460
SDZF-30	32	600	DN80	6	9000	2×230	380/220	2300	2420	1780	2506
SDZF-40	43.5	725	DN100	7	12500	2×420	380/220	2700	2100	2340	2673
SDZF-50	53	855	DN100	10	13500	3×230	380/220	2900	2100	2390	2687
SDZF-60	67	1005	DN125	12	18750	3×420	380/220	3350	2250	2600	2814
SDZF-80	90	1335	DN125	13.3	25000	4×420	380/220	4200	2640	2600	2866

Note:Design conditions: working pressure: 7bar, inlet temperature: 38ºC, pressure dew point: -20ºC

(2) Water-Cooled Combined Type Air Dryer

Product specifications

model	Air capacity (Nm3/min)	Weight of desiccant(kg)	Air nozzle diameter	Diameter of cooling water pipe	Cooling power (HP)	Cooling water flow (Nm3/h)	Voltage (V)	Equipment weight (kg)	L(mm)	W(mm)	H(mm)
SDZW-6	6.8	105	G1 1/2″	R1″	1.5	1.2	220	760	1500	1160	1940
SDZW-8	8.5	150	G2″	R1″	2	1.2	220	960	1500	1100	2016
SDZW-10	10.9	185	G2″	R1″	2.5	1.6	220	1120	1500	1240	2316
SDZW-12	12.8	185	G2″	R1″	2.5	1.8	220	1150	1500	1240	2316
SDZW-15	16	275	DN65	R1″	3	2	380/220	1660	1960	1450	2196
SDZW-20	22	395	DN65	R1 1/2″	4	3	380/220	1740	1970	1600	2475
SDZW-25	26.8	495	DN80	R1 1/2″	5	3.6	380/220	2075	2030	1630	2505
SDZW-30	32	605	DN80	R1 1/2″	6	4.6	380/220	2200	2240	1840	2519
SDZW-40	43.5	725	DN100	R1 1/2″	7	5.6	380/220	2784	2360	1900	2637
SDZW-50	53	860	DN100	R1 1/2″	10	7.2	380/220	3144	2400	2000	2638
SDZW-60	67	1005	DN125	R1 1/2″	12	9.2	380/220	3361	2540	2100	2719
SDZW-80	90	1335	DN125	R1 1/2″	13.3	10.8	380/220	4500	2640	2450	2818
SDZW-100	110	2155	DN150	R1 1/2″	20	12.4	380/220	6550	2680	2670	2985
SDZW-120	130	2650	DN150	R2″	25	14.6	380/220	7810	2820	2800	3041
SDZW-150	160	3205	DN200	R2″	25	16.2	380/220	8500	3290	3130	3190
SDZW-200	210	3825	DN200	R2 1/2″	40	18.6	380/220	9600	3350	3375	3309
SDZW-250	260	5260	DN250	R2 1/2″	60	24.4	380/220	Detailed parameters and consultation with manufacturers
SDZW-300	315	6160	DN250	R3″	70	30.5	380/220	Detailed parameters and consultation with manufacturers

Optional Accessories

Micro heat type
Dew point display
Dew point energy saving control
Special voltage
Environmental refrigerant
– 70 ºC dew point
Not limited to this

Company Profile

Certifications

Packaging & Shipping

FAQ

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Ok
Warranty:	1 Year
Flow:	Cross Flow
Material Status:	Bulk
Drying Medium:	Air
Structure:	All Kinds

Samples:	US$ 1000/Set 1 Set(Min.Order) \| Request Sample

Customization:	Available \|

air compressor

Can air compressors be used for cleaning and blowing dust?

Yes, air compressors can be effectively used for cleaning and blowing dust in various applications. Here’s how air compressors are utilized for these purposes:

1. Cleaning Machinery and Equipment:

Air compressors are commonly used for cleaning machinery and equipment in industries such as manufacturing, automotive, and construction. Compressed air is directed through a nozzle or blowgun attachment to blow away dust, debris, and other contaminants from surfaces, crevices, and hard-to-reach areas. The high-pressure air effectively dislodges and removes accumulated dust, helping to maintain equipment performance and cleanliness.

2. Dusting Surfaces:

Air compressors are also employed for dusting surfaces in various settings, including homes, offices, and workshops. The compressed air can be used to blow dust off furniture, shelves, electronic equipment, and other objects. It provides a quick and efficient method of dusting, especially for intricate or delicate items where traditional dusting methods may be challenging.

3. Cleaning HVAC Systems:

Air compressors are utilized for cleaning HVAC (Heating, Ventilation, and Air Conditioning) systems. The compressed air can be used to blow dust, dirt, and debris from air ducts, vents, and cooling coils. This helps improve the efficiency and air quality of HVAC systems, preventing the buildup of contaminants that can affect indoor air quality.

4. Blowing Dust in Workshops:

In workshops and garages, air compressors are often used to blow dust and debris from workbenches, power tools, and work areas. Compressed air is directed to blow away loose particles and maintain a clean and safe work environment. This is particularly useful in woodworking, metalworking, and other trades where dust and debris can accumulate during the manufacturing or fabrication processes.

5. Cleaning Electronics and Computer Equipment:

Air compressors are employed for cleaning electronics and computer equipment. The compressed air is used to blow dust and debris from keyboards, computer cases, circuit boards, and other electronic components. It helps in preventing overheating and maintaining the proper functioning of sensitive electronic devices.

6. Industrial Cleaning Applications:

Air compressors find extensive use in industrial cleaning applications. They are employed in industrial settings, such as factories and warehouses, for cleaning large surfaces, production lines, and equipment. Compressed air is directed through specialized cleaning attachments or air-operated cleaning systems to remove dust, dirt, and contaminants efficiently.

When using air compressors for cleaning and blowing dust, it is important to follow safety precautions and guidelines. The high-pressure air can cause injury if directed towards the body or sensitive equipment. It is advisable to wear appropriate personal protective equipment, such as safety glasses and gloves, and ensure that the air pressure is regulated to prevent excessive force.

Overall, air compressors provide a versatile and effective solution for cleaning and blowing dust in various applications, offering a convenient alternative to traditional cleaning methods.

air compressor

Can air compressors be integrated into automated systems?

Yes, air compressors can be integrated into automated systems, providing a reliable and versatile source of compressed air for various applications. Here’s a detailed explanation of how air compressors can be integrated into automated systems:

Pneumatic Automation:

Air compressors are commonly used in pneumatic automation systems, where compressed air is utilized to power and control automated machinery and equipment. Pneumatic systems rely on the controlled release of compressed air to generate linear or rotational motion, actuating valves, cylinders, and other pneumatic components. By integrating an air compressor into the system, a continuous supply of compressed air is available to power the automation process.

Control and Regulation:

In automated systems, air compressors are often connected to a control and regulation system to manage the compressed air supply. This system includes components such as pressure regulators, valves, and sensors to monitor and adjust the air pressure, flow, and distribution. The control system ensures that the air compressor operates within the desired parameters and provides the appropriate amount of compressed air to different parts of the automated system as needed.

Sequential Operations:

Integration of air compressors into automated systems enables sequential operations to be carried out efficiently. Compressed air can be used to control the timing and sequencing of different pneumatic components, ensuring that the automated system performs tasks in the desired order and with precise timing. This is particularly useful in manufacturing and assembly processes where precise coordination of pneumatic actuators is required.

Energy Efficiency:

Air compressors can contribute to energy-efficient automation systems. By incorporating energy-saving features such as Variable Speed Drive (VSD) technology, air compressors can adjust their power output according to the demand, reducing energy consumption during periods of low activity. Additionally, efficient control and regulation systems help optimize the use of compressed air, minimizing waste and improving overall energy efficiency.

Monitoring and Diagnostics:

Integration of air compressors into automated systems often includes monitoring and diagnostic capabilities. Sensors and monitoring devices can be installed to collect data on parameters such as air pressure, temperature, and system performance. This information can be used for real-time monitoring, preventive maintenance, and troubleshooting, ensuring the reliable operation of the automated system.

When integrating air compressors into automated systems, it is crucial to consider factors such as the specific requirements of the automation process, the desired air pressure and volume, and the compatibility of the compressor with the control and regulation system. Consulting with experts in automation and compressed air systems can help in designing an efficient and reliable integration.

In summary, air compressors can be seamlessly integrated into automated systems, providing the necessary compressed air to power and control pneumatic components, enabling sequential operations, and contributing to energy-efficient automation processes.

air compressor

What are the key components of an air compressor system?

An air compressor system consists of several key components that work together to generate and deliver compressed air. Here are the essential components:

1. Compressor Pump: The compressor pump is the heart of the air compressor system. It draws in ambient air and compresses it to a higher pressure. The pump can be reciprocating (piston-driven) or rotary (screw, vane, or scroll-driven) based on the compressor type.

2. Electric Motor or Engine: The electric motor or engine is responsible for driving the compressor pump. It provides the power necessary to operate the pump and compress the air. The motor or engine’s size and power rating depend on the compressor’s capacity and intended application.

3. Air Intake: The air intake is the opening or inlet through which ambient air enters the compressor system. It is equipped with filters to remove dust, debris, and contaminants from the incoming air, ensuring clean air supply and protecting the compressor components.

4. Compression Chamber: The compression chamber is where the actual compression of air takes place. In reciprocating compressors, it consists of cylinders, pistons, valves, and connecting rods. In rotary compressors, it comprises intermeshing screws, vanes, or scrolls that compress the air as they rotate.

5. Receiver Tank: The receiver tank, also known as an air tank, is a storage vessel that holds the compressed air. It acts as a buffer, allowing for a steady supply of compressed air during peak demand periods and reducing pressure fluctuations. The tank also helps separate moisture from the compressed air, allowing it to condense and be drained out.

6. Pressure Relief Valve: The pressure relief valve is a safety device that protects the compressor system from over-pressurization. It automatically releases excess pressure if it exceeds a predetermined limit, preventing damage to the system and ensuring safe operation.

7. Pressure Switch: The pressure switch is an electrical component that controls the operation of the compressor motor. It monitors the pressure in the system and automatically starts or stops the motor based on pre-set pressure levels. This helps maintain the desired pressure range in the receiver tank.

8. Regulator: The regulator is a device used to control and adjust the output pressure of the compressed air. It allows users to set the desired pressure level for specific applications, ensuring a consistent and safe supply of compressed air.

9. Air Outlet and Distribution System: The air outlet is the point where the compressed air is delivered from the compressor system. It is connected to a distribution system comprising pipes, hoses, fittings, and valves that carry the compressed air to the desired application points or tools.

10. Filters, Dryers, and Lubricators: Depending on the application and air quality requirements, additional components such as filters, dryers, and lubricators may be included in the system. Filters remove contaminants, dryers remove moisture from the compressed air, and lubricators provide lubrication to pneumatic tools and equipment.

These are the key components of an air compressor system. Each component plays a crucial role in the generation, storage, and delivery of compressed air for various industrial, commercial, and personal applications.

China Custom Air Dryer / Combined Air Dryer / Air Cooled Refrigerated Combined Air Dryer Compressor for Sale with Great quality
editor by CX 2024-05-17

China Professional CHINAMFG Top Quality W3065 Gasoline Petrol Industrial Gas Air Compressor 100L air compressor CHINAMFG freight

Product Description

1.Feature:

Gasoline engine, diesel engine air compressors. The best choice when electric power is not available.

Various air pump and various engine for customer’s different needs.

2.Specification:

Model	Motor	Capacity	Pressure	Cylinder	Speed	Air Tank	Weight	Packing dimension
SY-W3065E	4KW(5.5HP)	360L/Min	8Bar	φ65mm×3	1050RPM	100L	80KG	116×41×79CM

3.Compressed Air Solutions:

All the professionalism you need to have your correct supply of AIR(Air Volume, Air Pressur and Air Quality)
• When it comes to air (you need it, we have it).
• Piston compressors Cast Iron, Aluminum.
• Screw compressors, and all compressor accessories.
• Motors, Air Pumps, Regulators, Fliters, Dryers, after coolers and so on.
• Our Heavy Duty Air Compressors with a sense of(Quality saves your cost)
• Unique Design and Engineering, special Machinng Standards.
• Skilled labor for assembly line, backed up with technical support world wide.

4.About us:

Founded in 2571, ZheJiang CHINAMFG HangZhoui Technology Co., Ltd. is a subsidiary of CHINAMFG Electrical Stock Company,The company mainly produces air compressors,air blower,baking burner for tobacco and equipment. The company’s sales and operation headquarters is located in ZheJiang , the main production base is located in the eastern new area of HangZhou City, ZHangZhoug Province, covering an area of nearly 100 mu, with nearly 90,000 square production workshop, at the same time in ZheJiang HangZhou District CHINAMFG production base. Adhering to the corporate culture of CHINAMFG COMPANY “quality creation Sayi, credibility and integrity based on the world “, the company actively develops, forge ahead, and is committed to building the company into an international company with core competitiveness and leading the innovation and development of the industry.

5.Why choose us:

6.FAQ:

Q1: Are you the manufacturer or trading company?
A1: We are the manufacturer.

Q2: Where is your factory?
A2: It is located in HangZhou City, ZHangZhoug Province, China.

Q3: What’s the terms of trade?
A3: FOB,CFR,CIF or EXW are all acceptable.

Q4: What’s the terms of payment?
A4: T/T,L/C at sight or cash.

Q5: How long is your delivery time?
A5: Generally it is 5-10 days if the goods are in stock or it is 20-30 days if the goods are not in stock, it is according to quantity.

Q6: What is the advantage about your company?
A6: Our company has professional team and professional production line.

Q7: If we travel to China to checking your facility, are you welcome?
A7: Of course, why not? We will provide the whole accompany from you landing in China. Only Give us a call before your arrive. We will pick up you from the airport, living in our company’s hotel, and driving by car take you visiting our company. Warm Welcome!

Q8: How Many Years of your company working in this industry?
A8: We have 20-year experience in this field.

7. Contact us:

ZheJiang CHINAMFG HangZhouI TECHNOLOGY CO., LTD.
Address:Company Address: O Block,10th Floor,768 Xietu Road, Xihu (West Lake) Dis. District, ZheJiang
Address:ZHangZhoug Factory Address :23rd Street, New Eastern District, HangZhou City, ZHangZhoug Province
Address:ZheJiang Factory Address :1515 Xihu (West Lake) Dis. Road, Luojing Town, HangZhou District, ZheJiang

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	New Replacement
Warranty:	1year
Lubrication Style:	Lubricated

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

Are there special considerations for air compressor installations in remote areas?

Yes, there are several special considerations to take into account when installing air compressors in remote areas. These areas often lack access to infrastructure and services readily available in urban or well-developed regions. Here are some key considerations:

1. Power Source:

Remote areas may have limited or unreliable access to electricity. It is crucial to assess the availability and reliability of the power source for operating the air compressor. In some cases, alternative power sources such as diesel generators or solar panels may need to be considered to ensure a consistent and uninterrupted power supply.

2. Environmental Conditions:

Remote areas can present harsh environmental conditions that can impact the performance and durability of air compressors. Extreme temperatures, high humidity, dust, and corrosive environments may require the selection of air compressors specifically designed to withstand these conditions. Adequate protection, insulation, and ventilation must be considered to prevent damage and ensure optimal operation.

3. Accessibility and Transport:

Transporting air compressors to remote areas may pose logistical challenges. The size, weight, and portability of the equipment should be evaluated to ensure it can be transported efficiently to the installation site. Additionally, the availability of suitable transportation infrastructure, such as roads or air transportation, needs to be considered to facilitate the delivery and installation process.

4. Maintenance and Service:

In remote areas, access to maintenance and service providers may be limited. It is important to consider the availability of trained technicians and spare parts for the specific air compressor model. Adequate planning for routine maintenance, repairs, and troubleshooting should be in place to minimize downtime and ensure the longevity of the equipment.

5. Fuel and Lubricants:

For air compressors that require fuel or lubricants, ensuring a consistent and reliable supply can be challenging in remote areas. It is necessary to assess the availability and accessibility of fuel or lubricant sources and plan for their storage and replenishment. In some cases, alternative or renewable fuel options may need to be considered.

6. Noise and Environmental Impact:

Remote areas are often characterized by their natural beauty and tranquility. Minimizing noise levels and environmental impact should be a consideration when installing air compressors. Selecting models with low noise emissions and implementing appropriate noise reduction measures can help mitigate disturbances to the surrounding environment and wildlife.

7. Communication and Remote Monitoring:

Given the remote location, establishing reliable communication channels and remote monitoring capabilities can be essential for effective operation and maintenance. Remote monitoring systems can provide real-time data on the performance and status of the air compressor, enabling proactive maintenance and troubleshooting.

By addressing these special considerations, air compressor installations in remote areas can be optimized for reliable operation, efficiency, and longevity.

air compressor

What are the environmental considerations when using air compressors?

When using air compressors, there are several environmental considerations to keep in mind. Here’s an in-depth look at some of the key factors:

Energy Efficiency:

Air Leakage:

Noise Pollution:

Emissions:

Proper Waste Management:

Sustainable Practices:

air compressor

What are the key components of an air compressor system?

An air compressor system consists of several key components that work together to generate and deliver compressed air. Here are the essential components:

China Professional CHINAMFG Top Quality W3065 Gasoline Petrol Industrial Gas Air Compressor 100L air compressor CHINAMFG freight
editor by CX 2024-05-17

China wholesaler Carton Unfolded CHINAMFG Standard CHINAMFG Wholesale Outdoor Furniture Garden Set vacuum pump electric

Product Description

Outdoor patio furniture sofa set for garden

Features:

* CONTEMPORARY DESIGN – This outdoor furniture set is a CHINAMFG decoration to your patio, garden, deck, backyard, porch.

* STURDY & STABLE: Constructed from all-weather over a durable steel frame, this balcony furniture set boasts
* UPGRADED CHINAMFG – The thick cushions are covered with sun polyester fabric bring you strong support for better comfort.Removable cushion covers allow for easy cleaning and maintenance.

* CHARMING CONVERSATION SET – The sectional seating can be assembled into either a left or right chaise, and its sturdy frame is designed to be extra durable. Perfect for reading, relaxing, or family gathering.

Material	Wood,Aluminum, Rattan,Rope,fabric,
Advantages	1. Professional services.(12 years of factory experience)
	2. pretty competitive price. (Ex-factory price)
	3.OEM is available.(OEM and ODM one-stop service)
Useage	garden, hotel and so on Advantages
Package	Standard export carton and wood frame, with EPE foam inside to protect edges.
Style	Modern
Color	Color can be optional
Lead Time	20-25 days after deposit received
Payment terms	30% deposit T/T, 70% need paied before delivery
Quality Control	100 % inspection before packing

Q1. Any discount?
A1. At first, the price we quote are all wholesale price. Meanwhile, our best price will be offered according to the order quantity. So please tell us your purchase quantity when you inquire.I believe we can meet your need perfectly with competitive price and high quality.

Q2. Can I have a sample order?
A2. Yes, samples are available if necessary. Yet for consideration of saving postage, we also provide detailed pictures and other documents you require to smooth your concern as an alternative solution.

Q3. How long is the delivery time?
A3. Normally it will only take about 8-30 days according to type of product and quantity of your order.

Q4. How to deal with the faulty?
A4. Firstly, our products are produced in strict quality control system and the defective rate is very low.

Secondly, during the guarantee period, we will send replacement for free.

Q5. What can I do if the item is damaged during transportation?
A5. Our customer service staffs will help you with any questions or concerns. Under any circumstance, We will take well packed products pictures before shipping. So if any damage on products, please take pictures for us.

Q6.Are you manufacturer or trade company?

A6- We are the Manufacture/Factory.

Q7. Why choose our company ?

A7- All the products are directly CHINAMFG by and shipped from our factory with competitive price and reliable quality control.

– We have skillful technician production team and inspection team, to ensure delivery qualified product on time.

– To our regular customers, they may have a VIP price.

– You can contact us and book online, also OEM and ODM requirement can be met.

– We welcome to all clients visit our factory.

– Professional team to provide good after-sale service.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Style:	Modern
Type:	Combination
Usage:	Bar, Cafe, Restaurant
Folded:	Unfolded
Customized:	Customized
Condition:	New

Customization:	Available \|

oudoor furniture

What are the best practices for assembling and maintaining outdoor furniture with glass tops?

Assembling and maintaining outdoor furniture with glass tops requires careful attention to ensure proper installation and long-term durability. Here are some best practices to consider:

1. Assembling Outdoor Furniture:

Follow the manufacturer’s instructions carefully when assembling outdoor furniture with glass tops. Ensure that all parts are correctly aligned and securely fastened to prevent any instability or accidents.

2. Handle with Care:

When handling glass tops, wear protective gloves and take care to avoid dropping or banging them against hard surfaces. Glass can be fragile, so handle it with caution to prevent cracks or damage.

3. Use Protective Pads or Cushions:

Place protective pads or cushions between the glass top and the frame to prevent direct contact and reduce the risk of scratches or chipping. These pads also help provide stability and prevent the glass from sliding or shifting.

4. Avoid Excessive Weight or Pressure:

Avoid placing excessive weight or applying strong pressure on the glass top. Glass can be susceptible to breaking or cracking under heavy loads or impact. Use caution when placing objects on the surface and avoid sitting or standing on the glass top.

5. Clean Regularly:

Regularly clean the glass top using a mild glass cleaner and a soft, non-abrasive cloth or sponge. Avoid using harsh chemicals or abrasive materials that can scratch or damage the glass. Wipe away any spills or debris promptly to prevent staining.

6. Protect from Extreme Temperatures:

Avoid exposing outdoor furniture with glass tops to extreme temperature changes. Sudden temperature variations can cause the glass to expand or contract, leading to potential cracking or breakage. Consider using protective covers or moving the furniture to a shaded area during extreme weather conditions.

7. Inspect for Damage:

Regularly inspect the glass top for any signs of damage, such as cracks, chips, or loose fittings. If you notice any issues, address them promptly. Repair or replace the glass as necessary to maintain the integrity and safety of the furniture.

8. Store During Winter or Inclement Weather:

If possible, store outdoor furniture with glass tops indoors or in a covered area during the winter or periods of inclement weather. This protects the glass from potential damage caused by freezing temperatures, snow, or heavy rain.

9. Follow Safety Guidelines:

Adhere to safety guidelines provided by the manufacturer and any local regulations regarding the use and maintenance of outdoor furniture with glass tops. These guidelines may include weight restrictions, recommended cleaning methods, or other specific instructions to ensure safe and proper use.

By following these best practices, you can assemble and maintain outdoor furniture with glass tops effectively, promoting longevity and enjoyment of your outdoor living space.

oudoor furniture

Can you suggest creative ways to arrange outdoor furniture for gatherings?

Arranging outdoor furniture in creative ways can enhance the ambiance and functionality of your outdoor gatherings. Here are some suggestions for arranging outdoor furniture for gatherings:

1. Circular Conversation Area: Create a circular seating arrangement by arranging chairs or sofas in a circle. This layout encourages conversation and allows everyone to see and interact with each other. Place a central coffee table or fire pit in the middle to provide a focal point and space for drinks or snacks.

2. Outdoor Dining Setup: If you’re hosting a meal outdoors, set up a dining area with a large table and chairs. Position the table in a central location and arrange the chairs around it. You can opt for traditional dining chairs or mix it up with benches or a combination of seating options. Consider adding outdoor lighting, such as string lights or lanterns, to create a cozy and inviting atmosphere.

3. Intimate Lounge Area: Create a cozy and intimate lounge area by arranging outdoor sofas, loveseats, or lounge chairs facing each other. This setup is ideal for relaxed conversations or smaller gatherings. Add side tables or a coffee table between the seats for convenience.

4. Outdoor Theater Setup: Turn your outdoor space into a mini theater by arranging seating in a semi-circle or facing a large projection screen or outdoor TV. Provide comfortable seating options such as reclining chairs, outdoor bean bags, or even large floor cushions. Consider adding blankets or throws for extra coziness during evening gatherings.

5. Multiple Seating Areas: If you have a large outdoor space, consider creating multiple seating areas to accommodate different activities and conversations. You can have a lounge area for relaxed conversations, a dining area for meals, and a separate area with chairs or stools for mingling or enjoying a view. Use outdoor rugs or different flooring materials to visually define each seating area.

6. Outdoor Bar Setup: If you enjoy hosting outdoor parties, create a dedicated outdoor bar area. Set up a bar counter or a portable bar cart and arrange bar stools around it. Equip the bar area with essential accessories like a cocktail shaker, glasses, and a small refrigerator or cooler for drinks.

7. Cozy Corner Nooks: Utilize corners or nooks in your outdoor space by creating cozy seating areas. Place a bench or a small loveseat against a wall or a corner, and add cushions and throw pillows for comfort. This setup provides a secluded spot for quiet conversations or relaxation.

Remember to consider the flow of movement and the specific needs of your gatherings when arranging outdoor furniture. Leave enough space for guests to move around comfortably and ensure easy access to amenities like food, drinks, and restrooms.

oudoor furniture

Where can I find affordable outdoor furniture sets for my patio or deck?

If you’re looking for affordable outdoor furniture sets for your patio or deck, there are several places where you can find good deals. Here are some options to consider:

1. Online Retailers: Online retailers offer a wide range of options and often provide competitive prices. Websites such as Amazon, Wayfair, Overstock, and Walmart have dedicated sections for outdoor furniture where you can find affordable sets. Take advantage of online sales, discounts, and customer reviews to make informed purchasing decisions.

2. Local Furniture Stores: Check your local furniture stores or home improvement stores for outdoor furniture sales and clearance events. These stores often offer seasonal discounts or promotions, especially during the off-season. Visiting physical stores allows you to see and test the furniture in person before making a purchase.

3. Discount Stores: Discount stores, such as IKEA, Target, or Big Lots, frequently offer affordable outdoor furniture sets. These stores often have budget-friendly options without compromising on quality. Keep an eye on their outdoor furniture sections or sign up for their newsletters to stay informed about sales and special offers.

4. Secondhand Marketplaces: Consider exploring secondhand marketplaces like Craigslist, Facebook Marketplace, or local classified ads. Many people sell their used outdoor furniture at affordable prices, and you may find great deals on sets that are still in good condition. Be sure to inspect the furniture carefully and negotiate the price if necessary.

5. Garage Sales and Estate Sales: Garage sales and estate sales can be treasure troves for finding affordable outdoor furniture. Keep an eye out for local listings or signs in your neighborhood. While the selection may vary, you might stumble upon high-quality furniture sets at significantly discounted prices.

6. Outdoor Furniture Outlets: Outdoor furniture outlets or clearance centers often offer discounted prices on last season’s models or discontinued items. These outlets can be a great option for finding affordable outdoor furniture sets that still meet your needs and preferences.

Remember to compare prices, quality, and reviews before making a purchase. Additionally, consider the durability, materials, and maintenance requirements of the furniture to ensure you’re getting a good value for your money.

editor by CX 2024-05-17

China best Luxury Teak Garden Sofa Set Leisure Quality Rope Sofa CHINAMFG Alloy Villa Sofa Patio Furniture CHINAMFG Wood Chair supplier

Product Description

Product Name	A0163 chair	Application site	Garden, Dining Room, Restaurant Chair, and So
Aluminum alloy
Production Capacity	20000/ month	yieldly	HangZhou, ZheJiang , China

HangZhou Xihu (West Lake) Dis.ju Furniture

HangZhou Xihu (West Lake) Dis.ju Furniture is a company with 15 years of history in outdoor furniture production. In the past fifteen years.we have specialized in furniture design and development talents and advanced production equipment specializing in high-end production of outdoor furniture , PE rattan , natural rattan , umbrellas garden furniture tents beach furniture , etc We have been providing high-quality outdoor furniture to major European North America and Southeast Asian customers.”We pay more attention to quality and after-sales service We know that quality is the only way to develop long-term business.Our products have the following characteristics : weather resistance , waterproof and sunscreen , UV resistance durable , casual ,stylish and easy to maintain/clean.We have been committed to Furniture to create a casual lifestyle. Provide us with opportunities, you will find excellent outdoor furniture suppliers outdoors.

Product display

Product material

Product size

Our Services & Strength

HangZhou Xihu (West Lake) Dis.ju Furniture Co.,Ltd.is the international sales center of our factory.We focus on the research development .
production and sales of outdoor products.Since its establishment we have always adhered to the principle of ” honesty innovation and perfection ” . Adhering to this principle we have made great achievements

1 Our products have high quality and competitive prices.
2 Our company specializes in producing all kinds of outdoor furniture.
3 We are confident to provide you with high-quality products in a timely manner.
4 We welcome you to contact us for more information and look CHINAMFG to working with you!

1.Who are we?

We are based in ZheJiang , China, start from 2571,sell to North America(25.00%),Eastern Europe(10.00%),Southeast
Asia(10.00%),Northern Europe(10.00%),South Asia(10.00%),South America(5.00%),Oceania(5.00%),Western Europe(5.00%),Central
America(5.00%),Southern Europe(5.00%),Domestic Market(5.00%),Eastern Asia(3.00%),Africa(1.00%),Mid East(1.00%). There are total
about null people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment

3.what can you buy from us?
Outdoor sofa,Garden tables and chairs,Parasol,Cast aluminum furniture,Plastic wooden table and chair

4. why should you buy from us not from other suppliers?
Focus on high-end outdoor furniture production for more than 15 years, professional design and R&D team, very competitive prices,
strict compliance with delivery time, excellent quality control procedures and professional services.

5. what services can we provide?
Accepted Delivery Terms: FOB;
Accepted Payment Currency : USD , EUR, HKD , GBP , CNY , CHF ;
Accepted Payment Type: null;
Language Spoken:English,Chinese

product-list-1.html /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material:	Metal
Style:	Modern
Usage:	Bar, Hotel, Dining Room, Outdoor, Restaurant
Folded:	Unfolded
Customized:	Customized
Condition:	New

Samples:	US$ 350/Piece 1 Piece(Min.Order) \|

oudoor furniture

What are the latest trends in aluminum garden furniture designs and styles?

The world of aluminum garden furniture is constantly evolving, and there are several exciting trends in designs and styles. Here are some of the latest trends:

1. Minimalist and Contemporary:

Minimalist designs with clean lines and sleek profiles are gaining popularity. Contemporary aluminum furniture often features minimalist aesthetics, emphasizing simplicity and functionality. These designs create a modern and uncluttered look in outdoor spaces.

2. Mixed Materials:

Combining aluminum with other materials, such as wood, rope, or fabric, is a popular trend. This fusion of materials adds visual interest and texture to the furniture. For example, aluminum frames paired with wooden accents can create a warm and natural feel.

3. Outdoor Lounge Sets:

Lounge sets are in high demand, offering comfortable seating arrangements for relaxation and socializing outdoors. These sets often include sofas, club chairs, ottomans, and coffee tables. Aluminum lounge sets with plush cushions provide a luxurious and inviting outdoor seating experience.

4. Modular and Sectional Designs:

Modular and sectional furniture allows for versatility and customization. Aluminum garden furniture with modular designs enables users to rearrange seating configurations based on their needs and preferences. This flexibility is especially appealing for those who like to change their outdoor layout frequently.

5. Curved and Organic Shapes:

Furniture with curved or organic shapes adds a touch of elegance and softness to outdoor spaces. Aluminum garden furniture featuring rounded edges, curved backs, or flowing contours creates a more inviting and comfortable atmosphere.

6. Bold Colors:

While classic neutral tones remain popular, bold colors are making a statement in aluminum furniture designs. Vibrant shades like deep blues, rich greens, and warm oranges are being used to add personality and create focal points in outdoor settings.

7. Sustainable and Eco-Friendly Designs:

In line with the growing emphasis on sustainability, there is an increasing demand for eco-friendly aluminum furniture designs. Manufacturers are incorporating sustainable materials, such as recycled aluminum and responsibly sourced wood, and adopting environmentally conscious production practices.

8. Outdoor Dining Sets:

Outdoor dining sets continue to be a staple in aluminum furniture designs. These sets typically include a dining table and matching chairs, providing comfortable and stylish seating for outdoor meals and gatherings. Designs range from traditional to modern, catering to various aesthetic preferences.

These are just a few of the latest trends in aluminum garden furniture designs and styles. Whether you prefer minimalist, mixed materials, lounge sets, modular designs, curved shapes, bold colors, sustainable options, or outdoor dining sets, there is a wide range of options available to suit your personal taste and create a stylish outdoor living space.

oudoor furniture

What are the top considerations for selecting aluminum garden furniture for poolside areas?

When selecting aluminum garden furniture for poolside areas, there are several key considerations to keep in mind. These considerations will help ensure that the furniture is suitable for the poolside environment and meets your specific needs. Here are some of the top considerations:

1. Durability and Weather Resistance:

One of the primary considerations for poolside furniture is durability and weather resistance. The furniture should be able to withstand exposure to sunlight, chlorine, saltwater, and other pool chemicals without deteriorating or corroding. Look for aluminum furniture that is specifically designed for outdoor use and has been treated with protective coatings or finishes to enhance its resistance to the elements.

2. Rust Resistance:

Aluminum is naturally resistant to rust, making it an excellent choice for poolside furniture. However, it’s important to ensure that the furniture has proper rust-resistant features, such as stainless steel hardware or coated fasteners, to further enhance its durability in a poolside environment. Rust-resistant furniture will maintain its appearance and structural integrity over time.

3. Comfort and Ergonomics:

Comfort is another crucial consideration for poolside furniture. Look for aluminum furniture that includes comfortable cushions or seating surfaces. Consider the ergonomics of the furniture, such as backrest angles, seat depths, and armrest heights, to ensure optimal comfort for lounging by the pool. Test the furniture if possible or read customer reviews to gauge its comfort level.

4. Easy Maintenance:

Poolside furniture should be easy to clean and maintain due to the exposure to pool chemicals, sunscreen, and frequent use. Look for furniture with low-maintenance features, such as removable and washable cushion covers, as well as furniture frames that can be easily wiped down with mild soap and water. Avoid furniture with intricate designs or hard-to-reach crevices that can trap dirt and require extensive cleaning.

5. Safety Features:

Ensure that the aluminum furniture for poolside areas has appropriate safety features. Look for furniture that is stable and has non-slip feet or base to prevent accidental slips or tipping. Consider furniture with rounded edges or cushioned surfaces to minimize the risk of injuries. Additionally, check if the furniture meets relevant safety standards for outdoor use.

6. Style and Aesthetics:

Select aluminum garden furniture that complements the overall aesthetic of your poolside area. Consider the design, color, and finish of the furniture to ensure it matches your desired style. Aluminum furniture comes in a variety of styles, from modern and sleek to traditional and ornate, allowing you to find options that blend seamlessly with your poolside decor.

7. Size and Space:

Consider the available space in your poolside area when choosing aluminum furniture. Measure the area to ensure the furniture fits comfortably without overcrowding the space. Opt for furniture that is proportionate to the area and allows for easy movement and flow around the pool. Additionally, consider the number of people you expect to accommodate and choose furniture that provides adequate seating or lounging options.

By considering these factors, you can select aluminum garden furniture that is well-suited for poolside areas, combining durability, comfort, and style. Remember to also follow any additional guidelines or recommendations provided by the furniture manufacturer to ensure optimal performance and longevity of your poolside furniture.

oudoor furniture

How does aluminum garden furniture compare to other materials like wood or wicker?

When comparing aluminum garden furniture to other materials like wood or wicker, there are several factors to consider. Each material has its own unique characteristics and advantages. Here’s a comparison between aluminum, wood, and wicker garden furniture:

1. Durability and Weather Resistance:

Aluminum garden furniture is highly durable and resistant to various weather conditions. It is rust-resistant, lightweight, and does not require extensive maintenance. On the other hand, wood furniture requires regular maintenance, such as sealing or staining, to protect it from moisture, UV rays, and pests. Wicker furniture, typically made from natural or synthetic fibers, is prone to fading, mold, and mildew if not properly cared for.

2. Maintenance Requirements:

Aluminum furniture requires minimal maintenance. It can be easily cleaned with mild soap and water. Wood furniture, especially if left untreated, may require regular cleaning, sanding, and refinishing to maintain its appearance and durability. Wicker furniture may need occasional cleaning and spot treatment to prevent mold or mildew growth.

3. Weight and Portability:

Aluminum furniture is lightweight and easy to move, making it convenient for rearranging or storing. Wood furniture is heavier and may require more effort to move. Wicker furniture is generally lighter than wood but heavier than aluminum, offering a balance between portability and stability.

4. Style and Design:

Aluminum garden furniture is available in a wide range of styles and designs. It can be shaped and formed into various modern or traditional designs to suit different outdoor aesthetics. Wood furniture offers a classic and natural look, with options for different wood species and finishes. Wicker furniture has a distinct woven texture and is often associated with a more casual or tropical style.

5. Longevity:

Aluminum furniture is known for its longevity due to its resistance to rust, cracking, and warping. With proper care, it can last for many years. Wood furniture can also have a long lifespan if properly maintained, but it may require more regular upkeep. Wicker furniture, especially natural wicker, may have a shorter lifespan compared to aluminum or wood due to its susceptibility to damage from weather and moisture.

6. Eco-Friendliness:

Aluminum is a highly recyclable material, making it an eco-friendly choice for garden furniture. Wood furniture can be sustainable if sourced from responsibly managed forests. Wicker furniture made from natural fibers is biodegradable and renewable, while synthetic wicker may not be as environmentally friendly.

Ultimately, the choice between aluminum, wood, or wicker garden furniture depends on your specific preferences, budget, and the desired look for your outdoor space. Consider factors such as durability, maintenance requirements, style, and environmental impact when making your decision.

editor by CX 2024-05-17

China supplier Modern Outdoor Furniture Folding Garden Patio Leisure Dining Home Chair Table Set vacuum pump for ac

Product Description

Product Description

1PCS Table: Frame:20*10MM,19MM, PS wood slat:65*15MM
2 PCS chair: Frame:19MM, PS wood slat:65*15MM

Packing

Table:1set/CTN.
CHINAMFG size:1120*200*590mm.
A 40HQ can loading 510sets.

Others:

1.Frame:High quality steel frame with powder-coated.
2.Cushion:100% polyester, water-resistant cushion.

Loading:

Workshop:

Inquiry to us:
Email us your requests, we will offer you in 24 hours.

Negotiation:
Prices, payment way, delivery time, shipping, etc… we will CHINAMFG a contract.

Pay deposit:
After buyer arrange down payment or issuing B/L at sight to us, we will arrange production at soonest.

Production complete:
We will inform you before 1 week time of production complete.

Take photos& inspection:
We will inspection & take photos and send to you for reference 2 days before shipping.

Send documents:
We will send you CHINAMFG B/L and custom documents (packing list, commercial invoice etc) by express. Or Telex Released B/L.

Satisfy & repeat orders:
We thank you for your great support, and look forwarder to building long-term cooperation with you.

Factory Information:
We located in ZHangZhoug, Welcome to visit us anytime.

Factory Size	30000 Square meter	Factory Location	HangZhou, ZHangZhoug Province,China
R&D Staff	21-30	QC Staff	6-10
Contract Manufacturing	OEM service offered design service offered buyer label offered	Main Market	Europe,North America,South America,Asia
Export Percentage	85%-95%	Total Annual Sales Volume	USD3 Million to USD 5 Million

Fair show:
1)SPOGA in Germany
2)CIFF in ZheJiang & Gangzhou
3)Canton Fair in HangZhou

1. What is your MOQ?
MOQ is 1*40 GP container.
1*40GP container with no more than 2 items.
2. Do you aceept sample order?
We accept sample order. However customer has to pay for the product cost and shipping cost.
3. Can I customize outdoor furniture from you?
Yes, can change the Dimension according to your needs.
4. Do you have own factory?
Yes, we are manufacturer with own factory and moulds and production lines, engaged in outdoor furniture for more than 11 years.
5. How about your Lead time?
Our production process needs 15-35 days depends on the product’s design and when will you place the order.
6. What about the payment term?
a.20~ 30%deposit T/T paid before production,the balance againset copy of B/L or L/C at sight
b. L/C at sight.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material:	Steel and Rattan
Style:	Simple
Usage:	Bar, Hotel, Dining Room, Outdoor
Folded:	Unfolded
Customized:	Customized
Condition:	New

Samples:	US$ 400/Piece 1 Piece(Min.Order) \|

Customization:	Available \|

oudoor furniture

What are the advantages of using teak wood for garden furniture?

Teak wood is a popular choice for garden furniture due to its numerous advantages. Here are some key advantages of using teak wood for your garden furniture:

1. Natural Durability:

Teak wood is naturally durable and known for its exceptional strength and resistance to outdoor elements. It contains natural oils that act as a protective barrier against moisture, pests, and rot. These properties make teak wood highly suitable for outdoor use, as it can withstand exposure to rain, sun, and fluctuating temperatures.

2. Weather Resistance:

Teak wood’s natural oils also contribute to its excellent weather resistance. It is highly resistant to warping, cracking, and splitting, even when exposed to harsh weather conditions. This makes teak wood an ideal choice for garden furniture that needs to withstand the elements year-round.

3. Low Maintenance:

Teak wood requires minimal maintenance compared to other types of wood. Its natural oils help preserve the wood’s integrity and protect it from moisture damage, reducing the need for frequent sealing or staining. Simply cleaning the furniture periodically with mild soap and water is usually sufficient to maintain its appearance.

4. Longevity:

Teak wood is renowned for its longevity. When properly cared for, teak furniture can last for many years, often outlasting other types of outdoor furniture materials. Its durability and resistance to decay make it a long-term investment for your garden.

5. Aesthetic Appeal:

Teak wood has a beautiful natural golden hue that weathers to an attractive silver-gray patina over time. Many people appreciate the warm and timeless appearance of teak furniture, which can enhance the aesthetic appeal of any garden or outdoor space.

6. Versatility:

Teak wood’s versatility is another advantage. It can be easily crafted into various furniture designs, ranging from classic to contemporary styles. Whether you prefer traditional or modern aesthetics, teak furniture can complement a wide range of outdoor settings and personal preferences.

7. Sustainable and Eco-Friendly:

Teak wood is often sourced from sustainable plantations and is considered an eco-friendly choice for furniture. Well-managed teak plantations ensure the replenishment of trees and promote responsible forestry practices.

8. Investment Value:

Teak furniture is often regarded as an investment due to its durability and longevity. While the initial cost of teak furniture may be higher compared to some other materials, its longevity and minimal maintenance requirements can make it a cost-effective choice in the long run.

These advantages make teak wood a highly desirable option for garden furniture. Its natural durability, weather resistance, low maintenance, longevity, aesthetic appeal, versatility, sustainability, and investment value combine to create a compelling choice for outdoor furniture that can withstand the test of time.

oudoor furniture

How do I revive old or worn-out garden furniture to extend its lifespan?

If you have old or worn-out garden furniture, there are several steps you can take to revive it and extend its lifespan. By giving your furniture some attention and care, you can restore its appearance, functionality, and durability. Here’s how you can revive old or worn-out garden furniture:

1. Clean the Furniture:

Start by thoroughly cleaning the furniture to remove dirt, grime, and any existing coatings. Use a mild detergent or a specialized cleaner suitable for the furniture material. Scrub the surfaces with a soft brush or sponge, and rinse with water. Cleaning the furniture will help reveal its true condition and prepare it for further restoration steps.

2. Repair Damaged Parts:

Inspect the furniture for any damaged or broken parts, such as loose joints, cracked wood, or rusted metal. Repair or replace these parts as necessary. Tighten screws, apply wood glue to loose joints, and use appropriate repair techniques for different materials. This step will help ensure the structural integrity of the furniture and prevent further damage.

3. Sand the Surfaces:

If the furniture has a worn or rough surface, sanding can help smooth it out and prepare it for refinishing. Use sandpaper with an appropriate grit for the furniture material. Sand in the direction of the wood grain or follow the manufacturer’s recommendations for other materials. Sanding will remove imperfections, old finishes, and provide a clean surface for the next steps.

4. Apply a Fresh Finish:

Consider applying a fresh finish to protect and enhance the appearance of the furniture. The type of finish will depend on the furniture material. For wooden furniture, options include varnish, paint, or stain. Metal furniture may require a rust-resistant primer and paint. Follow the manufacturer’s instructions and apply multiple coats for better durability.

5. Replace or Reupholster Cushions:

If your garden furniture has cushions that are worn-out or faded, consider replacing or reupholstering them. Look for outdoor-grade fabric that is resistant to UV rays and moisture. Measure the dimensions of the cushions and sew or have them professionally reupholstered. This will give your furniture a fresh and comfortable look.

6. Apply Protective Coatings:

To further extend the lifespan of your furniture, consider applying protective coatings. For wooden furniture, use a wood sealer or exterior-grade varnish to protect it from moisture and UV damage. Metal furniture can benefit from a clear coat or rust-resistant spray to prevent corrosion. These coatings will help maintain the appearance and integrity of the furniture.

7. Store Properly:

When not in use, store your garden furniture properly to protect it from harsh weather conditions. If possible, cover the furniture with a waterproof cover or move it to a covered area. Storing furniture indoors during the winter or extreme weather can significantly extend its lifespan.

8. Regular Maintenance:

Maintain your revived furniture by regularly cleaning it and performing minor repairs as needed. Keep an eye out for signs of wear or damage and address them promptly. By maintaining your furniture, you can ensure its longevity and enjoy it for years to come.

By following these steps, you can breathe new life into your old or worn-out garden furniture and extend its lifespan, saving both money and resources in the process.

oudoor furniture

How do I choose the right garden furniture set for my outdoor space?

Choosing the right garden furniture set for your outdoor space involves considering several factors such as space availability, functionality, style, and budget. Here are some steps to help you make the right decision:

1. Assess Your Outdoor Space:

Start by evaluating the available space in your outdoor area. Measure the dimensions and consider any specific features or limitations, such as uneven terrain or existing structures. This will help you determine the appropriate size and layout for your furniture set.

2. Define Your Purpose:

Consider how you plan to use your outdoor space. Do you want a dining area for hosting meals, a cozy seating area for relaxation, or a combination of both? Defining your purpose will guide your choices in terms of the type of furniture set you need.

3. Consider Durability and Weather Resistance:

Since garden furniture is exposed to outdoor elements, choose materials that are durable and weather-resistant. Look for options such as teak, aluminum, or synthetic wicker that can withstand various weather conditions without deteriorating.

4. Evaluate Comfort and Ergonomics:

Comfort is key when selecting garden furniture. Test the seating options to ensure they provide adequate support and cushioning. Consider ergonomic features such as adjustable backrests or armrests for added comfort.

5. Match Your Style and Aesthetic:

Choose a furniture set that complements your outdoor space and reflects your personal style. Consider the overall aesthetic, whether it’s modern, rustic, or traditional. Look for furniture sets that align with your chosen theme and color palette.

6. Opt for Low-Maintenance Options:

Consider the level of maintenance required for the furniture set. Some materials, like teak or aluminum, require minimal upkeep, while others may need regular cleaning or refinishing. Assess your willingness and ability to maintain the furniture set over time.

7. Test Quality and Construction:

Inspect the quality and construction of the furniture set before making a purchase. Check for sturdy frames, secure joints, and durable finishes. Sit on the chairs and test the stability. Quality craftsmanship will ensure the longevity of your furniture set.

8. Set a Realistic Budget:

Establish a budget for your garden furniture set and stick to it. Consider the long-term investment and choose a set that offers good value for your money. Balance cost with quality and durability to make an informed decision.

9. Read Reviews and Seek Recommendations:

Before finalizing your choice, read customer reviews and seek recommendations from friends or family who have purchased similar furniture sets. Their experiences can provide valuable insights and help you make an informed decision.

By following these steps and considering your specific needs and preferences, you can choose the right garden furniture set that enhances your outdoor space and provides a comfortable and enjoyable environment for relaxation or entertainment.

editor by CX 2024-05-17

China Best Sales Custom Design CHINAMFG Outdoor Furniture Profile for Closet Wardrobe Door supplier

Product Description

Product Parameters

Aluminum Wardrobe Door Profile
1	Material	Aluminium alloy 6063,6061 etc. or according to customer’s request
2	Temper	T5,T6
3	Surface treatment	Mill finish, anodized, powder coated, electrophoresis, sand blasting, wood grain painting, matted, polishing bright etc.
4	Color available	Silver, Bronze, champagne, Matte, Natural for anodizing, RAL for powder coating
5	Packing details	Normally protected film inside and shrink film outside
6	Samples time	10-15day after receive the mold fee
7	Delivery	Normally 20 days after deposit
8	Production Capacity	1500MT/Month
9	MOQ	500kg
10	Port	ZheJiang PORT
11	OEM & ODM service

Product type:

Aluminum window and door profile,office partition profile,construction CHINAMFG profile,aluminum pipe, industrial CHINAMFG profile,medical armrest/handrail CHINAMFG profile, shutter CHINAMFG profile, louver CHINAMFG profile,garage door CHINAMFG profile, CHINAMFG curatin wall profile,sliding door CHINAMFG profile, CHINAMFG wardrobe door profile, kitchen cabinet CHINAMFG profile,aluminum curtain rail,aluminum hinge,aluminum rail,aluminum air conditioning tuyere profile,diamond net window CHINAMFG profile.

ODM Service

Step 1. Send your detail drawing or physical samples to us

Step 2.Our engineer will make mould design based on your drawings or samples.

Step 3. Detail quotation for both mould and products.

Step 4. Test out product samples for confirmation.

Step 5. After confirmation on samples ,we can start mass production.

OEM Service

Step 1. Send us the authorization letter of using your brand name.

Step 2.We will design the CHINAMFG version logo per your request.

Step 3.Confirmation on the version charge.

Step 4. Provide the OEM Service on all your products.

Company Profile

Zeyi CHINAMFG Co., Ltd. is a professional CHINAMFG extrusion profile and CHINAMFG window and door factory
established in 2003, We are located in ZheJiang Province, HangZhou City, 150 kilometers from ZheJiang and ZheJiang port.
Our Company has 338 employees including 50 professional and technical engineers and covers an area of more
than 20, 000 square meters. Our CHINAMFG profile factory has 8 extrusion production lines, annual production
capacity reach 20 thousand tons. We are specialized in construction profiles, decorative profiles, industrial profiles,
and can supply O E M and O D M service. The window and door CHINAMFG profiles are produced the most. We have
advanced anodized workshop, powder coating workshop, electrophoresis workshop, and wooden grain transfer
printing workshop. Different surfaces can meet customer demand. Our window and door processing workshop can
make many kinds of window and door systems, such as casement window and door, sliding window and door, folding
window and door, etc. We are qualified with I S O 9 0 0 1 quality system certificate. Our efficient sales team, competitive
price advantage, stable production and delivery time have attracted lots of customers from all over the world. We have
exported to Southeast Asia, Africa, Europe, the Middle East, and South America. Our company insists on the policy that
“the customer is the supreme, prestige promised, quality guaranteed, professional service “. We are looking CHINAMFG to
establishing a long-term CHINAMFG business with overseas customers.

FAQ

Q1: What kind of product can you provide?

A: we can provide OEM or ODM CHINAMFG extrusion, fabrication, and various surface treatments.
Q2: Are you factory or trading company?
A: we are professional manufacturer of CHINAMFG profile .
Q3:Why choose us?
A: 1.We are professional CHINAMFG extrusion profile supplier for over 14 years.
2.Our products could be in different colors and finish according to customer.
3.We not only produce CHINAMFG profile ,but also provide solutions for you.
4.We provide competitive price,good quality CHINAMFG profiles and best service.
5.We also produce fabrication.
Q4:Could you offer the sample for check?
A: We can offer 10cm long sample for normal profile and can offer 10cm long sample after starding the mould for
customized profile.If you want other length of sample,please let me know.
Q5:What surface finish and color can you provide?
A: We have Mill finish, anodizing, powder coated, sandblasting, electrophoresis ,Silvery white, black, golden,
champagne, dark bronze or according to your requirement.
Q6: How long will it take to get my order?
A: It is depend on the complexity of your drawing, once you have confirmed the final design and tolerances, a die
can be ordered and delivered to our shop in about 1-2weeks. And a sample can be delivered to you in 7days for
your confirmation.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Type:	Aluminum Wardrobe Profile
Shape:	Square, Round, Angle or Based on Your Drawing
Grade:	6000 Series
Temper:	T3-T8
Window & Door Aluminium Profile:	70-120 Series
Alloy:	Alloy

Customization:	Available \|

oudoor furniture

How can I prevent outdoor furniture from fading in the sun?

To prevent outdoor furniture from fading in the sun, you can take several measures to protect the furniture and extend its lifespan. Here are some tips to consider:

1. Choose Fade-Resistant Materials:

Opt for outdoor furniture made from fade-resistant materials. Look for materials specifically designed to withstand sun exposure, such as UV-resistant plastics, fade-resistant fabrics, or furniture with a protective coating.

2. Apply UV-Protective Sealants:

Coat your outdoor furniture with a UV-protective sealant or finish. These products create a barrier between the furniture and the sun’s UV rays, helping to prevent fading and discoloration.

3. Use Protective Covers:

When the furniture is not in use, cover it with protective covers specifically designed for outdoor furniture. These covers help shield the furniture from direct sunlight and other elements, preventing fading and damage.

4. Provide Shade:

Position your outdoor furniture in shaded areas whenever possible. Natural shade provided by trees or umbrellas can help reduce the direct exposure to sunlight, minimizing the risk of fading.

5. Utilize Umbrellas or Canopies:

Consider incorporating umbrellas or canopies into your outdoor furniture setup. These shade-providing structures can be adjusted to block the sun’s rays and protect the furniture from excessive exposure.

6. Rearrange Furniture Periodically:

Rotate and rearrange your outdoor furniture periodically. This helps distribute the effects of sun exposure more evenly across the furniture, preventing specific areas from fading more quickly than others.

7. Clean and Maintain Regularly:

Keep your outdoor furniture clean and well-maintained. Regularly remove dirt, debris, and stains, as they can contribute to the fading process. Follow the manufacturer’s instructions for proper cleaning and maintenance.

8. Store During Extreme Weather:

If possible, store your outdoor furniture indoors or in a covered area during extreme weather conditions, such as intense sunlight or heavy rain. This provides additional protection and extends the life of the furniture.

9. Consider Retractable Awnings or Sunshades:

If you have a larger outdoor space, consider installing retractable awnings or sunshades. These adjustable covers can be extended to block the sun’s rays when needed, protecting the outdoor furniture from excessive sunlight.

By implementing these preventive measures, you can significantly reduce the risk of fading and keep your outdoor furniture looking vibrant and beautiful over time.

oudoor furniture

How can I make my outdoor furniture more comfortable with accessories?

If you’re looking to enhance the comfort of your outdoor furniture, there are various accessories you can consider. Here are some ways to make your outdoor furniture more comfortable:

1. Cushions and Pillows: Adding cushions and pillows is one of the easiest ways to make outdoor seating more comfortable. Look for cushions specifically designed for outdoor use, as they are typically made with durable and weather-resistant materials. Choose cushions and pillows in soft, water-resistant fabrics that complement your outdoor décor.

2. Outdoor Rugs: Placing an outdoor rug beneath your furniture can add both comfort and style to your outdoor space. Outdoor rugs provide a soft surface underfoot, making the seating area more inviting. Opt for rugs made from materials that can withstand outdoor conditions, such as polypropylene or natural fibers like sisal or jute.

3. Umbrellas or Shade Sails: If your outdoor space is exposed to direct sunlight, consider adding umbrellas or shade sails to provide shade and relief from the sun’s rays. This can help create a more comfortable and enjoyable seating area, especially during hot summer days. Look for umbrellas or shade sails that are adjustable and made from UV-resistant materials.

4. Outdoor Curtains: Installing outdoor curtains around your seating area can add privacy, create a sense of enclosure, and provide shade. Choose curtains made from outdoor-rated fabrics that are resistant to fading and mildew. You can also opt for sheer curtains to allow for airflow while still providing some privacy.

5. Mosquito Netting: If you frequently deal with mosquitoes or other insects, consider using mosquito netting around your outdoor furniture. This can help create a bug-free zone, allowing you and your guests to relax comfortably without being bothered by pests. Look for netting that is specifically designed for outdoor use and easy to install.

6. Outdoor Throw Blankets: For cooler evenings or during transitional seasons, provide cozy comfort by offering outdoor throw blankets. These can be made from weather-resistant materials or outdoor-friendly fabrics that are easy to clean. Place the blankets on the back of chairs or in a basket nearby for guests to use as needed.

7. Outdoor Lighting: Proper lighting can contribute to the overall comfort and ambiance of your outdoor space. Install outdoor lighting fixtures such as string lights, lanterns, or sconces to create a warm and inviting atmosphere. This will not only enhance the comfort but also extend the usability of your outdoor furniture into the evening hours.

Remember to choose accessories that are specifically designed for outdoor use and can withstand the elements. Regular cleaning and maintenance of the accessories will help ensure their longevity and continued comfort.

oudoor furniture

What are the key features to consider when shopping for outdoor furniture?

When shopping for outdoor furniture, there are several key features to consider to ensure you choose the right pieces for your needs and preferences. Here are the key features to keep in mind:

1. Material: The material of the outdoor furniture is crucial as it determines its durability, resistance to the elements, and maintenance requirements. Common materials include teak, aluminum, wrought iron, HDPE wicker, steel, and recycled plastic. Consider the weather conditions, level of maintenance you’re willing to invest, and the desired aesthetic when selecting the material.

2. Comfort: Outdoor furniture should be comfortable for you and your guests to enjoy. Look for features such as ergonomic design, supportive cushions, and adjustable elements like reclining chairs or ottomans. Test the furniture in person, if possible, to ensure it provides the desired level of comfort.

3. Style and Design: Outdoor furniture comes in a variety of styles and designs to suit different tastes and outdoor aesthetics. Consider the overall style of your outdoor space and choose furniture that complements it. Whether you prefer modern, traditional, rustic, or eclectic designs, select furniture that enhances the visual appeal of your patio, deck, or garden.

4. Size and Scale: Before purchasing outdoor furniture, measure the available space and consider the scale of the furniture in relation to the area. Oversized furniture can make a small space feel cramped, while furniture that is too small may look out of place. Ensure the furniture fits well and allows for comfortable movement around it.

5. Functionality: Think about how you plan to use your outdoor space and choose furniture that caters to those needs. Whether you want a dining set for outdoor meals, a lounge area for relaxation, or versatile pieces that can serve multiple purposes, prioritize functionality when selecting outdoor furniture.

6. Maintenance Requirements: Different types of outdoor furniture have varying maintenance requirements. Consider the level of maintenance you’re willing to undertake. Some materials may require regular cleaning, staining, or protective treatments, while others are low-maintenance and only need occasional cleaning. Choose furniture that aligns with your maintenance preferences and capabilities.

7. Budget: Set a budget for your outdoor furniture purchase and consider the quality and longevity of the furniture within that budget. While affordability is important, prioritize quality and durability to ensure your outdoor furniture lasts for years to come.

By considering these key features when shopping for outdoor furniture, you can make informed decisions and select pieces that meet your needs, style, and budget.

editor by CX 2024-05-17

China Standard Customized Beautiful Metal Garden Tables and Chairs (HG508) wholesaler

Product Description

Factory Introduction:
We have our own factory. We can produce any products by ourselves.
The area of factory is over 10000 square meters.
The staff number is about 100. We have 8 large processing machinery.
The speed of producing is very fast. At the same time, the efficiency of producing is very high.
The biggest advantage of our company is customizing products as you request, as long as you send drawings to us.
Molds are carefully machined to the closest tolerance using the latest equipment
The prototype should be created if the customer require
After-sale Service:
We are sure that the products we produced will make you satisfied.
If you have any question after buying, please inform us. We will deal with it within the shortest period of time.
Welcome to ask any question! We will answer the question for you carefully.
Welcome to our company for visiting!

General introduction of our company as following table:

Company: HangZhou CHINAMFG metal products co. Ltd
Product: CHINAMFG and zinc products
Use: Car, motor, machine, furniture, dining sets, garden, etc
Process: Die casting, sand casting, gravity casting and machining
Surface treatment: Shot blasting, polishing, electroplating, electrophoresis, spraying, paint and oxidation
Advantage: Customizing products as you request
Market: Russia, USA, Canada, Australia, Finland, Brazil, etc

PROCESS

Workshop:

Business Range:

parts range: aluminum alloy parts:(A380,ADC12,ADC10,6061,Etc……)

Zinc alloy parts:(ZAMAK3, ZAMAK5 Etc……)

Brass alloy parts:(Si9Cu3, Cuzn-37 Etc……)

Iron parts: (Nodularc Iron, Ductile Iron Etc……)

Etc……

Production Process:

Die casting

Sand casting

Gravity casting

Stamping casting

Extrusion profile

Pressing casting

CNC

Etc……

Finishing: E-coated, Powder coated, Anodizing, Painting, Etc……

Product Character:

-Customized Tool Design Drawings are Available;

-Molds are carefully machined to the closest tolerance using the latest equipment;
-The prototype should be created if the customer require;
-We offer secondary processing such as oil spraying, screen printing, assembly ect.
-Traceability is maintained from all inspection gages
-Mold repair and maintenance are also supported internally.

Advantage:

1.more than 20years experience in casting and machining

2.one-stop service,from mould design,casting,machining to surface treatment

3.abundant technology force, good condition of production and inspection,

and perfect after-sales service.

4:ISO9001,SGS,TS16949 certificate

5:have own quality laboratory,offer CMM inspection,leaking

test,Spectroscope raw material test.

6:rich experience in exporting,export products to more than 50 countries

Application:

Machinery, Electrical, Agriculture, Building, Medical,Etc……

Package and Shipping:

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material:	Metal
Style:	European
Usage:	Outdoor
Folded:	Unfolded
Customized:	Customized
Condition:	New

Customization:	Available \|

oudoor furniture

Can I leave aluminum garden furniture outside year-round, or should I store it?

While aluminum garden furniture is generally designed to withstand outdoor conditions, it is recommended to take certain precautions to ensure its longevity. Here are some factors to consider when deciding whether to leave your aluminum furniture outside year-round or store it:

1. Climate:

The climate in your area plays a significant role in determining whether you should leave your aluminum furniture outside year-round. In regions with mild climates and minimal extreme weather conditions, such as moderate temperatures and low humidity, it is usually safe to leave the furniture outdoors.

2. Harsh Weather:

If you live in an area with harsh weather conditions, such as extreme heat, heavy rain, snow, or high winds, it is advisable to store your aluminum furniture during these periods. Prolonged exposure to such elements can gradually affect the appearance and durability of the furniture.

3. UV Exposure:

Direct and prolonged exposure to sunlight can cause fading or discoloration of the furniture’s finish over time. If your aluminum furniture is consistently exposed to intense sunlight, it may be beneficial to provide shade or use protective covers to minimize UV damage.

4. Maintenance Effort:

Leaving your aluminum furniture outside year-round may require more maintenance to keep it in good condition. Regular cleaning, applying protective coatings, and addressing any signs of damage or wear become even more important when the furniture is exposed to outdoor elements continuously.

5. Storage Space:

If you have sufficient storage space available, storing your aluminum furniture during periods of non-use or harsh weather can help prolong its lifespan. Storing the furniture in a dry and well-ventilated area, such as a garage, shed, or covered patio, can provide additional protection.

6. Furniture Covers:

If leaving your aluminum furniture outside year-round, consider using furniture covers designed for outdoor use. Quality covers can help protect the furniture from dust, dirt, UV rays, and moisture. Ensure that the covers are properly fitted and secure to prevent wind damage.

7. Manufacturer’s Recommendations:

Refer to the manufacturer’s recommendations or care instructions for your specific aluminum furniture. They may provide guidance on whether the furniture is suitable for year-round outdoor use or if it is advisable to store it during certain conditions.

In conclusion, while aluminum garden furniture is generally durable and weather-resistant, storing it during harsh weather conditions and providing regular maintenance can help prolong its lifespan and keep it in optimal condition. Consider the climate, weather patterns, UV exposure, maintenance effort, storage space availability, and manufacturer’s recommendations to make an informed decision on whether to leave your aluminum furniture outside year-round or store it.

oudoor furniture

What are the advantages of using powder-coated aluminum for garden furniture frames?

Powder-coated aluminum offers several advantages when used for garden furniture frames. Here are the key benefits:

1. Durability:

Powder coating creates a highly durable finish that can withstand outdoor conditions. The powder coating process involves applying a dry powder to the aluminum surface and then curing it in an oven. This results in a hard and protective layer that resists chipping, scratching, and fading. The durable nature of powder coating ensures that the furniture frames can withstand regular use and exposure to the elements without significant wear or damage.

2. Weather Resistance:

Powder-coated aluminum is highly resistant to weathering. It can withstand exposure to sunlight, rain, humidity, and temperature fluctuations without corroding or deteriorating. The powder coating acts as a barrier that protects the aluminum from moisture, UV rays, and other environmental factors that can cause damage. This makes powder-coated aluminum ideal for outdoor furniture that needs to withstand various weather conditions throughout the year.

3. Color Options:

Powder coating offers a wide range of color options for garden furniture frames. The powder coating process involves using pigmented powders, allowing for customization in terms of color and finish. Whether you prefer vibrant hues or subtle tones, there are numerous color choices available to suit your aesthetic preferences and complement your outdoor decor. Additionally, the color of powder-coated aluminum remains vibrant and fade-resistant over time.

4. Easy Maintenance:

Powder-coated aluminum is relatively low-maintenance compared to other materials. The smooth and non-porous surface of the powder coating makes it easy to clean. Generally, regular cleaning with mild soap and water is sufficient to keep the frames looking their best. The durable finish also helps prevent the accumulation of dirt, stains, and grime, making maintenance tasks easier and less frequent.

5. Eco-Friendly:

Powder coating is an environmentally friendly finishing option. The powder coating process does not involve the use of solvents or emit harmful volatile organic compounds (VOCs) into the air. Additionally, powder coatings are highly efficient, with minimal waste, as any overspray can be collected and reused. This makes powder-coated aluminum a sustainable choice for garden furniture.

Overall, the advantages of using powder-coated aluminum for garden furniture frames include durability, weather resistance, a wide range of color options, easy maintenance, and eco-friendliness. These qualities make powder-coated aluminum an excellent choice for outdoor furniture that can withstand the elements while maintaining its appearance and functionality over time.

oudoor furniture

Can you recommend affordable options for aluminum garden furniture sets?

If you’re looking for affordable options for aluminum garden furniture sets, there are several brands and retailers that offer budget-friendly choices. Here are some recommendations for affordable aluminum garden furniture sets:

1. IKEA:

IKEA is known for its affordable furniture options, and they offer a variety of aluminum garden furniture sets at budget-friendly prices. They have a range of styles and designs to choose from, suitable for different outdoor spaces and preferences.

2. Amazon Basics:

Amazon Basics is Amazon’s own brand that offers a wide range of products at affordable prices. They have aluminum garden furniture sets that are competitively priced and often come with positive customer reviews.

3. Walmart:

Walmart is a popular retailer that offers a range of affordable outdoor furniture options, including aluminum garden furniture sets. They have a variety of styles and sizes available, allowing you to find a set that fits your budget and outdoor space.

4. Target:

Target is another retailer that offers affordable and stylish aluminum garden furniture sets. They often have seasonal sales and promotions, making it a good place to find budget-friendly options.

5. Wayfair:

Wayfair is an online furniture retailer that offers a wide selection of aluminum garden furniture sets at various price points. They have frequent sales and deals, allowing you to find affordable options without compromising on quality or style.

6. Local Discount Stores:

Check your local discount stores or home improvement stores for discounted aluminum garden furniture sets. These stores often carry budget-friendly options, especially during the off-season or clearance sales.

When searching for affordable aluminum garden furniture sets, it’s important to compare prices, read customer reviews, and consider the quality and durability of the furniture. Look for sets that offer a good balance between affordability and functionality.

Remember to also consider factors such as warranty, customer service, and any additional features or accessories included with the set. With careful research and comparison, you can find affordable aluminum garden furniture sets that meet your needs and budget.

editor by CX 2024-05-17

China OEM Modern Customized Leisure Hot Sale Garden Hotel Home Resort Villa Project Patio Chinese Plastic Wood Teak CHINAMFG Outdoor Bar Table and Chairs vacuum pump adapter

Product Description

Modern Customized Leisure Hot sale Garden Hotel Home Resort Villa Project Patio Chinese Plasticwood Teak CHINAMFG Outdoor bar table and chairs

Why choose us?

1.    Rich OEM & ODM Experience
Our factory has 20years experience focus on producing high quality outdoor furniture, we will make your idea come true according to your design drawing or just photo share.
2.    Strict Quality Standards
We have professional Quality Control Team, every our department has QC checking, and must be pass checking then through to next department. Before packing and loading we must have totally full checking.
3.    Professional Sales Service Team
We will provide professional solution for every customer, gain more market share. We will be your backup and grow up together.
4.    Competitive Price With Friendly MOQ
Competitive price highly support you to win more market share.
Sample order is also welcome.
5.    Delivery On Time
25-45days delivery time
6.    Quick Response
We will response you within 0.5-12hours, will never later than 24hours.
7.    Before & After Service
Professional suggestion and information help you choose the right styles.
Provide high resolution photos service.
Provide detail photos for your close checking from order beginning to loading
8.    One-Stop Service
We have established long term business with more than 30 raw material suppliers in China. We have an efficient supply chain management system to make sure the delivery on time. We focus on producing outdoor furniture, but also supply Sun-umbrella, bean bags, hammock etc. to support with one-stop shopping service to save your time and cost. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Style:	Modern
Material:	Aluminum
Folded:	Unfolded
Customized:	Customized
Condition:	New
Use Place:	Outdoor and Indoor

Samples:	US$ 150/Piece 1 Piece(Min.Order) \|

Customization:	Available \|

oudoor furniture

How do aluminum chairs contribute to the versatility and flexibility of seating arrangements?

Aluminum chairs are known for their versatility and flexibility, making them a popular choice for various seating arrangements. Whether in homes, offices, events, or outdoor settings, aluminum chairs offer several advantages that contribute to their adaptability. Here’s how aluminum chairs contribute to the versatility and flexibility of seating arrangements:

1. Lightweight and Portable:

Aluminum chairs are lightweight, making them easy to move and rearrange as needed. Their portability allows for quick and effortless changes to seating arrangements. Whether you need to accommodate more guests, create open spaces for activities, or rearrange seating for different events, aluminum chairs can be easily carried and arranged to suit your needs.

2. Stackable Design:

Many aluminum chairs feature a stackable design, allowing them to be stacked vertically when not in use. This stackability feature is particularly useful in spaces where storage is limited. By stacking the chairs, you can maximize floor space and create a clutter-free environment. The ability to stack and store aluminum chairs efficiently adds to their versatility in accommodating changing seating needs.

3. Indoor and Outdoor Use:

Aluminum chairs are suitable for both indoor and outdoor use, further enhancing their versatility. They are designed to withstand various environmental conditions, including exposure to sunlight, moisture, and temperature fluctuations. This makes them suitable for a wide range of seating arrangements, from dining areas and conference rooms to patios, gardens, and outdoor events.

4. Range of Styles and Designs:

Aluminum chairs come in a wide range of styles, designs, and finishes, allowing them to complement different interior or exterior aesthetics. Whether you prefer a modern, minimalist look or a more traditional design, there are aluminum chairs available to suit your preferences. The variety of styles and designs makes it easier to integrate aluminum chairs into various seating arrangements without sacrificing visual appeal.

5. Durable and Easy to Maintain:

Aluminum chairs are known for their durability and ease of maintenance. They are resistant to rust, corrosion, and fading, which makes them suitable for long-term use in different settings. Additionally, aluminum chairs are easy to clean and require minimal upkeep. This low maintenance requirement contributes to their versatility, as they can be used in high-traffic areas or outdoor environments without extensive cleaning or upkeep demands.

6. Flexible Seating Configurations:

With aluminum chairs, you have the flexibility to create different seating configurations to accommodate various group sizes and activities. Whether arranging chairs in rows for a conference, clustering them around tables for dining, or creating a circular seating arrangement for group discussions, aluminum chairs can be easily positioned to meet your specific seating needs.

7. Combination with Other Furniture:

Aluminum chairs can be easily combined with other types of furniture to create versatile seating arrangements. They can be paired with tables, benches, or even cushions to enhance comfort and functionality. This versatility allows for the creation of cohesive seating setups that cater to different purposes and preferences.

Aluminum chairs offer the advantage of being lightweight, portable, and stackable, making them easy to move and store. They are suitable for both indoor and outdoor use, come in a range of styles, and are durable and easy to maintain. With their flexibility and adaptability, aluminum chairs can be integrated into various seating arrangements, providing versatile seating options for different environments and activities.

oudoor furniture

Are there eco-friendly or sustainable options for aluminum chair production?

Yes, there are eco-friendly and sustainable options for aluminum chair production. The production process of aluminum chairs can be modified to reduce environmental impact and promote sustainability. Here are some ways in which aluminum chair production can be more eco-friendly:

1. Recycled Aluminum:

Using recycled aluminum is an eco-friendly option for chair production. Aluminum is a highly recyclable material, and using recycled aluminum reduces the need for extracting and refining new raw materials. Recycled aluminum can be melted down and reprocessed to create new aluminum products, including chairs. Choosing aluminum chairs made from recycled content helps conserve natural resources and reduces energy consumption and greenhouse gas emissions associated with primary aluminum production.

2. Sustainable Manufacturing Practices:

Manufacturers can adopt sustainable practices during the production process of aluminum chairs. This includes optimizing energy efficiency, reducing water usage, and minimizing waste generation. Implementing technologies and processes that reduce environmental impact, such as using renewable energy sources, recycling process waste, and implementing water conservation measures, can make the production process more sustainable.

3. Low VOC Finishes:

The finishes applied to aluminum chairs can have an environmental impact. Opting for low VOC (volatile organic compound) finishes or powder coatings reduces the emission of harmful chemicals into the environment. Low VOC finishes have lower levels of toxic solvents, contributing to better indoor and outdoor air quality and minimizing the environmental footprint of chair production.

4. Longevity and Durability:

Designing aluminum chairs with longevity and durability in mind promotes sustainability. Chairs that are built to last with high-quality materials and craftsmanship reduce the need for frequent replacements. By investing in durable aluminum chairs, you contribute to a more sustainable approach by reducing waste and minimizing the consumption of resources over time.

5. End-of-Life Recycling:

Consideration should be given to the end-of-life phase of aluminum chairs. Designing chairs with recyclability in mind and establishing recycling programs or partnerships with recycling facilities can ensure that the chairs are properly recycled at the end of their lifespan. This closes the loop on the product life cycle and reduces waste sent to landfills.

6. Third-Party Certifications:

Look for aluminum chairs that have obtained third-party certifications or labels indicating their environmental credentials. For example, certifications such as the Forest Stewardship Council (FSC) or the Cradle to Cradle (C2C) certification demonstrate that the chairs have met certain environmental and social sustainability criteria.

By considering these eco-friendly options and sustainable practices, manufacturers and consumers can contribute to minimizing the environmental impact of aluminum chair production and promote a more sustainable furniture industry.

oudoor furniture

Where can I find affordable and high-quality aluminum chairs for my home or business?

If you’re looking for affordable and high-quality aluminum chairs for your home or business, here are some places where you can find them:

1. Furniture Retailers: Visit local furniture retailers or home improvement stores in your area. They often carry a variety of seating options, including aluminum chairs. You can explore their collections, compare prices, and inquire about any ongoing promotions or discounts. Additionally, some furniture retailers have online platforms where you can browse and purchase aluminum chairs conveniently.

2. Online Marketplaces: Online marketplaces such as Amazon, eBay, and Walmart offer a wide selection of aluminum chairs from various sellers. These platforms provide user reviews and ratings, which can help you assess the quality and affordability of the chairs. Additionally, online marketplaces often have competitive pricing and frequent sales, making it easier to find affordable options.

3. Wholesale Retailers: Consider checking out wholesale retailers or warehouse clubs that specialize in selling furniture and home goods in bulk. These retailers often offer discounted prices on aluminum chairs, especially when purchased in larger quantities. It can be a cost-effective option for businesses or individuals looking to furnish multiple spaces.

4. Online Furniture Stores: Many online furniture stores specialize in offering a wide range of seating options, including aluminum chairs. These stores often have competitive pricing and provide detailed product descriptions, images, and customer reviews to help you make informed purchasing decisions. Some online furniture stores also offer customization options, allowing you to tailor the chairs to your specific design preferences.

5. Local Secondhand Stores or Thrift Shops: Check out local secondhand stores, thrift shops, or consignment shops in your area. These establishments often have a rotating inventory of used furniture, including aluminum chairs. While the selection may vary, you can often find affordable options that are still in good condition. Keep in mind that when buying secondhand, it’s important to inspect the chairs for any damage or signs of wear.

6. Direct from Manufacturers: Some manufacturers of aluminum chairs sell their products directly to consumers. This eliminates the middleman and can result in cost savings. Check the websites of manufacturers or reach out to them directly to inquire about purchasing their chairs for your home or business. Direct purchasing from manufacturers also offers the advantage of accessing any customization options they may provide.

When searching for affordable and high-quality aluminum chairs, it’s important to consider factors such as the chairs’ construction, materials used, warranties offered, and customer reviews. This will help ensure that you find chairs that not only meet your budget but also provide long-lasting durability and comfort.

Remember to compare prices, explore multiple sources, and read customer feedback to make an informed decision. By exploring furniture retailers, online marketplaces, wholesale retailers, online furniture stores, local secondhand stores, thrift shops, or direct purchasing from manufacturers, you can find a range of options for affordable and high-quality aluminum chairs for your home or business.

editor by CX 2024-05-17

China Standard CHINAMFG Frame Oxford Fabric Camp Furniture Moon Foldable Camping Chairs vacuum pump adapter

Product Description

Aluminum frame oxford fabric camp furniture moon foldable camping chairs

Rock Cloud Portable Camping Chair Ultralight Folding Chairs Outdoor for Camp CHINAMFG Backpacking Lawn Beach Sports, Low Seat Height

ULTRALIGHT & PORTABLE:
Light as a wing, our new portable camp chair is only 2.6 lbs, package size 13.7x5x5 in, unfolding size 21x20x27 in, seat height 9 in, more suitable for the beach or child. You can easily take it to anywhere with carry bag, especially suitable for outdoor activities such as camping, hiking, backpacking, picnic, fishing, beach, sporting events, as well as indoor use
NEW DESIGN:
Compared to our classic ultralight camping chair, the new design uses a new frame structure, more stable and more comfortable. High quality detachable anti-slip big foot to increase foot area so it will not sink in sand or soft ground, super stable and safe to use, and will not damage the bottom of the tent
STURDY & DURABLE:
This portable camping chair is built with an aerospace-grade aluminum alloy 7075, lightweight but load capacity up to 265 lbs, waterproof, no rust, corrosion resistant, engineering grade 900D oxford seat fabric with double reinforced V stitch is durable, flexible and machine washable for ease of care, enough for all your outdoor needs
INSTALL IN SECONDS:
Lightweight aluminum pole system with hand guide connection. The folding chair’s shock corded main frame allows you to guide the connected poles directly into the frame. This unique design enables you to just pop it open, attach the seat fabric and You are ready to go! Rope ring design makes the assembly process more easy and labor-saving
ERGONOMIC DESIGN:
The ergonomic three-dimensional cutting, the cloth cover has a good support, and it is still comfortable to sit for a long time. Breathable mesh panels allow for increased air flow in hot and humid environments, helping to keep you cooler. Side pockets on both sides, you can put mobile phones and water cups, free hands at any time, enjoy nature!

Description	Alu. folding lightweight beach chairs
Item no.	XSOD-FS0111-2
Specification	600D polyester + PVC coated
Specification	Aluminum frame:14mm
Unit Size	64x34x56cm,folding : 42x8cm
Unit weight	1.1kgs
Packing	1pc/carrying bag,10pcs/CTN
CTN size	53x35x26cm
G.W./N.W.	10/9kgs
Inquiry Q’TY	2500pcs
Sample time	7 days
Delivery time	25 days

Our Advantages

Company Profile

FAQ

Q1: Can I get 1 sample to test?

A1: Of course you can buy a sample first for test, just tell us demand and product model that you want!

Q2: Should I pay for the sample?
A2:Yes you need to pay for it and bear the shipping cost. But the sample cost can be refundable after order confirmation when your
quantity of the order more than the MOQ.

Q3: Can I custom my logo and appoint the color on the product?
A3:Yes just offer me your logo design with AI or PDF format so that our designer will make a mock up for your reference

Q4: What is the delivery time after payment?
A4:Normally the delivery time is 2-10 days for sample and 20-40 days for mass production.

Q5: What methods of payment do you accept for the full-order?
A5: Normally, we support online Alibaba Trade Assurance, Visa, MasterCard, Western Union and T/T.

Q6: Are you able send to FBA fulfillment center?
A6: Yes We provide delivery of Amazon FBA warehouse services. Stick the barcodes, warning stickers,FBA labels for free.

Q7: why should you buy from us not from other suppliers?
Engaged in outdoor camping CHINAMFG sports more than 15 years.
Advantages is super strong product sources and R&D, more than 20 year business experience professional term. very familar operated
with B2B & B2C business model. grow up with small buyers.

Q8: How Can I order?
A8:You can send us inquiry or Click “Start Order” and pay directly! Please do write your Name, Address, Zip code and Phone number!

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material:	Aluminum Alloy
Type:	Single
Style:	Antique
Usage:	Beach, Mountain
Folded:	Folded
Armrest:	Without Armrest

Samples:	US$ 25/Piece 1 Piece(Min.Order) \|

Customization:	Available \|

oudoor furniture

Are there child-friendly aluminum chair options suitable for family use?

Yes, there are child-friendly aluminum chair options available that are suitable for family use. These chairs are designed with features that prioritize the safety and comfort of children while still maintaining the sleek and durable characteristics of aluminum. Here’s why child-friendly aluminum chairs are a great choice for family use:

1. Size and Proportions:

Child-friendly aluminum chairs are specifically designed with appropriate sizes and proportions for children. They are smaller in scale compared to standard adult-sized chairs, ensuring a comfortable and secure seating experience for children of different ages. The seat height, depth, and backrest height are adjusted to accommodate children’s proportions, promoting good posture and comfort.

2. Child-Safe Features:

Child-friendly aluminum chairs incorporate various safety features to protect children. These may include rounded edges and corners to prevent accidental bumps or injuries. Some chairs may also have non-slip foot caps or grips to provide stability and prevent sliding or tipping. These safety features help create a secure seating environment for children.

3. Durable and Easy to Clean:

Aluminum chairs are known for their durability, which is an important factor when considering furniture for family use. Child-friendly aluminum chairs are designed to withstand the demands of active children and resist wear and tear. They are also easy to clean, usually requiring just a simple wipe down with mild soap and water. The durability and ease of maintenance make these chairs suitable for the inevitable spills and messes that come with family use.

4. Lightweight and Portable:

Child-friendly aluminum chairs are lightweight, allowing children to move and arrange them easily. This mobility is beneficial for various family activities, such as setting up a play area or accommodating seating needs during gatherings. The portability of these chairs also makes them convenient for outdoor use, such as picnics or camping trips.

5. Design and Aesthetics:

Child-friendly aluminum chairs come in a range of attractive designs and colors that appeal to children. They may feature playful patterns, vibrant hues, or themed motifs that resonate with kids’ interests and preferences. The appealing design of these chairs adds a fun and engaging element to family spaces, encouraging children to enjoy their seating experience.

6. Versatility:

Child-friendly aluminum chairs are versatile and can be used in various settings within the home. They can be utilized in dining areas, playrooms, outdoor spaces, or even as portable seating options for children’s parties or events. Their adaptability makes them a practical choice for families with evolving seating needs.

When selecting child-friendly aluminum chairs, it’s essential to ensure they meet safety standards and are suitable for the age range of your children. Look for chairs that are certified for child use and have passed relevant safety tests.

By choosing child-friendly aluminum chairs, families can provide their children with comfortable, safe, and visually appealing seating options that are durable and easy to maintain. These chairs can be enjoyed both indoors and outdoors, enhancing family spaces with their practicality and design.

oudoor furniture

How do I choose the right size and style for my aluminum chairs?

Choosing the right size and style for your aluminum chairs requires considering several factors such as the intended use, available space, and overall design aesthetic. Here’s a detailed guide to help you make the right choice:

1. Consider Intended Use:

Think about how you plan to use the aluminum chairs. Are they primarily for dining, relaxation, or both? Chairs used for dining purposes typically have a standard height that allows for comfortable seating at a dining table. If you’re looking for chairs for relaxation, you may consider options with features like reclining backs or additional cushions for added comfort.

2. Evaluate Available Space:

Measure the available space where the aluminum chairs will be placed. Consider both the width and depth of the area to ensure the chairs fit comfortably without overcrowding the space. If you’re using the chairs for outdoor dining, make sure there’s enough room for guests to move around the table and pull out their chairs without obstruction.

3. Chair Dimensions:

Review the dimensions of the chairs you’re considering. Look for information on seat height, seat width, seat depth, and overall chair height. Seat height is particularly important for dining chairs to ensure they align with the height of your dining table. Seat width and depth should provide enough space for comfortable seating. Overall chair height affects the chair’s proportions and how it fits within the space.

4. Chair Style:

Consider the style of the aluminum chairs and how it complements your overall design aesthetic. Aluminum chairs come in various styles, ranging from sleek and modern to more traditional or rustic designs. Choose a style that harmonizes with your existing decor or the desired theme of your space. Additionally, consider the chair’s shape, armrests, and backrest design, as these elements contribute to both style and comfort.

5. Ergonomics:

Take into account the ergonomics of the chairs to ensure optimal comfort and support. Look for chairs that have a well-designed backrest that provides proper lumbar support. Seats with a slight contour or padding can also enhance comfort during extended periods of sitting. Ergonomic chairs promote good posture and reduce the risk of discomfort or strain.

6. Try Before You Buy:

If possible, try out the chairs before making a purchase. Visit a showroom or sit on similar models to get a sense of their comfort level and overall feel. This allows you to assess the chair’s comfort, stability, and whether it suits your personal preferences.

7. Consider Maintenance:

Think about the level of maintenance required for the chairs. Aluminum chairs are generally low maintenance and resistant to rust and corrosion. However, if the chairs have additional features like cushions or fabric upholstery, consider the maintenance requirements for those as well, such as cleaning or reupholstering.

By considering the intended use, available space, dimensions, style, ergonomics, and maintenance requirements, you can choose the right size and style of aluminum chairs that not only fit your needs but also enhance the comfort and aesthetics of your space.

oudoor furniture

Where can I find affordable and high-quality aluminum chairs for my home or business?

If you’re looking for affordable and high-quality aluminum chairs for your home or business, here are some places where you can find them:

editor by CX 2024-05-17